Meishan Road Sign and Signage Single Suspension Pole Processing Factory Quality Durable

Description :

　　Meishan

　　The sign for increasing the number of lanes is used to remind vehicle drivers to drive with caution as the number of lanes increases. It is placed in an appropriate position in front of the section where the number of lanes increases. When used on general highways, it has a blue background, white graphics, white borders, and blue border; When used on highways, it has a green background, white graphic, white border, and green border

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Meishan city, and we provide free technical guidance. Meishan Road Traffic Sign Manufacturer, Meishan Traffic Sign Production, Meishan Road Sign Pole Processing, Meishan Traffic Sign Pole, Meishan Scenic Area Indication Sign Manufacturer, Meishan Tourist Scenic Area Identification Sign Manufacturer, Meishan Traffic Sign Production Manufacturer, Meishan Traffic Sign Manufacturer, Meishan Traffic Safety Sign Manufacturer, Meishan Safety Warning Sign Manufacturer, Meishan Traffic Sign Pole Customization, Meishan Hot Dip Galvanized Traffic Sign Pole Manufacturer, Meishan Multi pole Traffic Sign Pole, Meishan Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Meishan Road Signs and Signboards

　　The patterns and specifications of highway signs, traffic safety signs, traffic signs, highway signs, traffic triangle warning signs, and traffic circle signs are strictly designed and produced in accordance with GB-5768-2009 "Road Traffic Signs". The company produces products such as highway signs, signs, directional signs, F-poles, Y-shaped poles, T-poles, L-shaped poles, single column, highway guardrails, and road traffic facilities. Friends from all walks of life are welcome to contact us for consultation and cooperation

　　Meishan Road Sign and Signage Single Suspension Pole Processing Factory Quality Durable

　　The distance warning sign for tunnel exit is used to indicate the distance to the front tunnel exit. It is set up in extra long tunnels with a length of over 3000m, starting from 2000m away from the tunnel exit and every 500m. This sign is usually set on the side wall of the tunnel and is used for general highways. It has a blue background, white graphics, white border, and blue lining; When used on highways, it has a green background, white graphic, white border, and green border

AfterSalesService :

• Road signs and signage