Kunming directional sign manufacturer, identification sign manufacturer, saves money and worries

Description :

　　Kunming

　　Traffic police gesture map: Some busy traffic intersections usually require traffic police to stand guard, and sometimes even have gestures to command, in order to ensure smooth vehicle and traffic flow. Traffic police do not use gestures to have different meanings. In order to avoid confusion during vehicle driving, car owners should understand it while driving! This way, there won't be any mistakes during the driving process

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Kunming, and we provide free technical guidance. Kunming road traffic sign manufacturer, Kunming traffic sign production, Kunming road sign pole processing, Kunming traffic sign pole, Kunming scenic spot indicator sign manufacturer, Kunming tourist scenic spot identification sign manufacturer, Kunming traffic sign manufacturer, Kunming traffic sign manufacturer, Kunming traffic safety sign, Kunming safety warning sign, Kunming traffic sign pole customization, Kunming hot-dip galvanized traffic sign pole manufacturer, Kunming multi pole traffic sign pole, Kunming expressway sign pole manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Kunming directional sign manufacturer

　　Attachment type traffic sign pole: The sign is attached and installed on the overpass and nearby structures, and can be divided into two types based on the location of the attachment board: on the roadway attachment type and road survey attachment type; The installation height of attached signs should comply with the provisions of GB3.12.1 and GB3.12.3. If the sign support structure is located in the clear zone of the roadside, it should ensure that vehicles leaving the road pose a hazard. Otherwise, it is advisable to use a stepped efficiency structure or set up corresponding protective and warning facilities

　　Kunming directional sign manufacturer identification sign manufacturer saves money and effort. The shape is circular, and the yield sign is an equilateral triangle with a downward vertex;

　　(3) The color of the indicator sign is blue background and white pattern

AfterSalesService :

• Manufacturer of directional signs