Production of Traffic Sign Posts in Changde

Description :

　　Changde

　　More than ten years of production experience, focusing on quality

　　With 18 years of experience in producing outdoor billboards and tens of thousands of engineering practices, we have standardized technical expertise;

　　Our company's projects have covered over 85% of cities nationwide and have received high praise from customers;

　　Excellent material, good craftsmanship, and excellent quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. ISO 9001 quality system certification;

　　3. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, capable of independently creating molds with exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Collaborative units of transportation facilities within the industry;

　　2. Serving over 1000 transportation facility manufacturers;

　　3. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　4. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Changde city, and we provide free technical guidance. Changde Road Traffic Sign Manufacturer, Changde Traffic Sign Production, Changde Road Sign Pole Processing, Changde Traffic Sign Pole, Changde Scenic Area Indicator Manufacturer, Changde Tourist Scenic Area Sign, Changde Traffic Sign Production Manufacturer, Changde Traffic Sign Manufacturer, Changde Traffic Safety Sign, Changde Safety Warning Sign, Changde Traffic Sign Pole Customization, Changde Hot Dip Galvanized Traffic Sign Pole Manufacturer, Changde Multi pole Traffic Sign Pole, Changde Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation at the location of * * * according to the dimensions specified in the design drawing. After processing according to the regulations, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

AfterSalesService :

• Production of Traffic Sign Posts in Changde