Changde Three sided Flip Manufacturer - Three sided Flip Billboard Production Company - Installation Price

Description :

　　ChangdeThree sided flipping manufacturer Changde Three sided Flip Customization Welcome to Visit Our Factory for Inspection

　　Hunan Naideli Company integrates research and development, design, production, sales, wholesale, and installationThree sided flipping billboardManufacturer, the company's main projects include: three sided flipping billboards, multi sided flipping billboards, three sided flipping column billboards, T-shaped three sided flipping billboards, and three sided flipping billboardsbillboard advertisingWe are a large-scale outdoor advertising billboard production enterprise, specializing in the production of billboards, internal luminous tri fold billboards, and lightbox tri fold billboards. We are a member unit of the Municipal Entrepreneurs Association and a large-scale tri fold billboard manufacturer in China. We have been selected multiple times by the Municipal Administration for Industry and Commerce, the Municipal Economic Development and Reform Commission, the Municipal Transportation Bureau, and the Municipal Science and Technology Bureau as "Contract abiding and Credit worthy Enterprise, Civilized and Honest Enterprise, Key Cooperative Unit of Transportation Facilities, and Technological Innovation Enterprise".

　　Before lifting the truss, the flipping billboard can be installed and then lifted as a whole. Before installation, it is necessary to determine the pivot position of the three sided flipping steel structure. Before assembling the three sided flipping, the structure should be supported according to the pivot position to ensure that the deformation of the structure is consistent with that after lifting. The pivot points of the Longmen three sided flipping billboard are located on both sides of the structure. When installing a single column triangular billboard, the pivot points must be the average position equidistant from the center position. It is not recommended to install a double-sided single column three sided flipping billboard on the ground as the pivot points are unstable. There are various installation forms for three sided billboards.

　　If there is sinking or loosening, reinforcement treatment must be carried out. The treatment method is to first excavate the silt within the 600mm × 600mm range of the landing pole area to the old soil layer, replace it with 1:1.5 graded sand and gravel, and compact it layer by layer, and then re reinforce the cushion plate. Based on the construction period and schedule requirements, each subcontractor should reasonably arrange the construction according to the current construction situation of the project and the requirements of the construction period and schedule. Projects that cannot be completed before the rainy season but do not affect the project schedule can be scheduled to be carried out after the rainy season.

　　Three sided flipping manufacturers should develop corrective measures and carry out repairs or dismantling. Naideli Three sided Flip reminds you to pay attention to the following points when making the basic bracket. The production of the three sided flip up and down frames requires that the upper and lower frames of the three sided flip billboard also use No. 8 or No. 10 channel steel, and the inclination of each meter should not be too large at 0.3 millimeters or less. We can customize various sizes and styles for you. Naideli Three sided Flip reminds you to pay attention to the following points when making the basic bracket. The production of the three sided flip up and down frames requires that the upper and lower frames of the three sided flip billboard also use No. 8 or No. 10 channel steel.

　　Suggest the customer to install and paste the image on the construction site. When pasting the three flip screen, be sure to avoid direct sunlight, as the screen is easily stretched and elongated due to heat. When the temperature is below zero in winter, the three sided folding prism should be removed and transported to the warm storage to paste the picture. If it is necessary to paste a three sided flip screen outdoors, tools such as a hot air blower or iodine tungsten lamp should be used to heat and compact the edges of the screen. Suggest not pasting the screen too thick, not exceeding 4 layers. The adhesive backing of ordinary car stickers will expire in about 5 years. Construction is not suitable in winter in the north.

AfterSalesService :

• Changde Three sided Flip Manufacturer