Shantou Three sided Flip Manufacturer Shantou Three sided Flip Quotation One stop Service

Description :

　　ShantouThree sided flipping manufacturer Shantou Three sided Flip Quotation One stop Service

　　Hunan Naideli Company integrates research and development, design, production, sales, wholesale, and installationThree sided flipping billboardManufacturer, the company's main projects include: three sided flipping billboards, multi sided flipping billboards, three sided flipping column billboards, T-shaped three sided flipping billboards, and three sided flipping billboardsbillboard advertisingWe are a large-scale manufacturer of outdoor large advertising billboards, including billboards, internally illuminated tri fold billboards, and lightbox tri fold billboards.

　　So in the hot summer weather, it is necessary to regularly check the Naideli three sided flipping shaft and add lubricating oil in a timely manner to ensure that the three sided flipping billboard operates in a good environment. Check that the adhesive images on the three sided flipping triangular prism of the three sided flipping billboard should not exceed four layers. When replacing the Naideli three sided flipping case advertisement, if there are a large number of existing images, all images should be torn off before pasting. Advertising images are more prone to tearing off and flipping over during high temperatures in summer.

　　The size of the three sided flipping billboard after installation is 5mm in length and 4mm in height from the production specifications specified in the contract. According to the gap standard specified in the contract, the installation error shall not exceed plus or minus 30% of the agreed standard. The allowable deviation for the verticality of the installation of the three sided flipping billboard is ≤ 0.0088mm, and the standard for the levelness of the installation of the three sided flipping billboard is that the total length is less than 5mm; the length must be controlled within 3mm every 6 meters. Run smoothly without any lag, in a wave like orderly and gradual manner. When the synchronous three sided flipping billboard is in operation.

　　The foundation bracket of the three sided flipping manufacturer is designed and manufactured by the purchaser themselves, and requires strict calculation of the foundation's compressive strength and the bracket's wind resistance strength to meet the compressive requirements of the metal bracket and the weight of the three sided flipping billboard on the foundation, and to meet the wind resistance requirements of local strong winds. If the three sided flipping billboard is installed on a metal bracket, the back of the bracket should be completely sealed with an iron plate to prevent light from passing through and affecting the visual effect. Accuracy requirements for the production of foundation supports: a. Horizontal beams and vertical columns are required. b. The unevenness in the length direction of the screen is required to be less than 10 millimeters.

　　Easy to cause damage to the motor gearbox. Another way of access is to use bevel gears, which are 2-3 times more expensive than chains and are mainly used for flat backs to flip three sides. The installation of the three flip motor and the interior of the two side frames, as well as the absence of protrusions on the back of the three flip billboard, make it more aesthetically pleasing to fit snugly against the wall during installation. The angle design of bevel gears is crucial. A 45 ° cone angle will generate significant axial thrust, causing significant damage to the final gear shaft bearings of the three sided flipping motor gearbox. Flipped billboards and automatic flipping ads are alternative names for three sided flipping billboards.

AfterSalesService :

• Shantou Three sided Flip Manufacturer