The quality of the Chuxiong Expressway sign double hanging pole processing plant is reliable

Description :

　　Chu Xiong, for example, goes straight, turns left, parks, detours, etc; Traffic warning signs: generally equilateral triangles (or edges), light yellow bottom with gray black edges, gray black pattern

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Chuxiong city, and we provide free technical guidance. Chuxiong Road Traffic Sign Manufacturer, Chuxiong Traffic Sign Production, Chuxiong Road Sign Pole Processing, Chuxiong Traffic Sign Pole, Chuxiong Scenic Area Indicator Manufacturer, Chuxiong Tourist Scenic Area Sign, Chuxiong Traffic Sign Production Manufacturer, Chuxiong Traffic Sign Manufacturer, Chuxiong Traffic Safety Sign, Chuxiong Safety Warning Sign, Chuxiong Traffic Sign Pole Customization, Chuxiong Hot Dip Galvanized Traffic Sign Pole Manufacturer, Chuxiong Multi pole Traffic Sign Pole, Chuxiong Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Chuxiong Expressway Sign

　　What is the function of road traffic signs? Road traffic signs refer to specific information such as graphics, symbols, colors, and text used to guide and direct vehicles and personnel on the road, as well as safety facilities for controlling, warning, and guiding traffic

　　The quality of the Chuxiong Expressway sign double hanging pole processing plant is reliable

　　Road traffic sign poles are provided with a force calculation book for the pole body based on the lamp pole shape diagram. The strength of the formed square steel used for the pole body should comply with the corresponding standards with the external structure. The lamp pole should be sealed to prevent water vapor from entering. The welding process should ensure that the entire pole body is free of cracks, leaks, continuous air holes, undercutting, etc. The weld seam should be smooth and lubricated, without any bumps or undulations, and there should be no welding defects. Welding inspection statements should be provided. With the development of transportation roads, wherever you go nowadays, there will be roads to that place. And with the gradual popularity of road sign poles, you don't have to worry about not finding direction on the road. So today, let's talk about which parts this road sign pole equipment is composed of. The production of road traffic sign poles includes single columns, crossbeams, etc. Along with traffic signs, there are also side chutes with screw transmission equipment inside, The transmission equipment of the screw should include a vertical lifting nut pair with a row of pulleys installed on the right side, and the right side of the pulley should be closely attached to the inner wall of the single column. The material used to make the traffic sign pole should have a reflective effect at night, and the size and shape of various traffic sign poles are specified by national standards

　　Next:

AfterSalesService :

• Highway signs