Shaoyang speed limit sign, identification sign manufacturer one-stop service

Description :

　　Shaoyang

　　Tourist area signs provide directional distance signs for tourist attractions, Zhengzhou sign manufacturers, directional signs convey road direction and location distance information, Changsha Road signs indicate vehicles and pedestrians, prohibition signs prohibit certain traffic behaviors of vehicles and pedestrians, warning signs warn vehicles, pedestrians pay attention to dangerous locations ahead of the road, and road traffic sign main signs

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Shaoyang city, and we provide free technical guidance. Shaoyang Road Traffic Sign Manufacturer, Shaoyang Traffic Sign Production, Shaoyang Road Sign Pole Processing, Shaoyang Traffic Sign Pole, Shaoyang Scenic Area Sign Manufacturer, Shaoyang Tourist Scenic Area Sign Manufacturer, Shaoyang Traffic Sign Production Manufacturer, Shaoyang Traffic Sign Manufacturer, Shaoyang Traffic Safety Sign Manufacturer, Shaoyang Safety Warning Sign Manufacturer, Shaoyang Traffic Sign Pole Customization, Shaoyang Hot Dip Galvanized Traffic Sign Pole Manufacturer, Shaoyang Multi pole Traffic Sign Pole, Shaoyang Expressway Sign Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Shaoyang speed limit sign, identification sign manufacturer one-stop service

　　The company integrates research and development, production, sales, and installation into an integrated production enterprise for traffic sign poles and signs. With over ten years of experience in research and development and tens of thousands of engineering practices, it has received unanimous praise from the market and has been repeatedly selected as a "Contract abiding and Credit worthy Enterprise, Civilized and Honest Enterprise, Key Cooperative Unit of Transportation Facilities, and Science and Technology Innovation Enterprise" by the Municipal Administration for Industry and Commerce, the Municipal Development and Reform Commission of the Civil Economy, the Municipal Transportation Bureau, and the Municipal Science and Technology Bureau

　　One stop service for speed limit signs, identification signs, and manufacturers in Shaoyang. Road traffic signs are very important, and their dimensions also comply with national standards. Today, we will introduce the national standard dimensions for road traffic signs

　　Next:

AfterSalesService :

• Speed limit signs