Diqing Expressway Sign Double Suspension Rod Processing Factory Company Direct Delivery

Description :

　　Long distance transportation in Diqing should have rain shelter measures to prevent rainwater from accumulating on the surface of the reflective film for a long time

　　More than ten years of production experience, focusing on quality

　　18 years of experience in producing outdoor billboards and tens of thousands of engineering practices;

　　Our company's sales coverage covers over 85% of cities nationwide and has received high praise from customers;

　　High quality materials, excellent craftsmanship, and superior quality

　　1. High quality aluminum and steel are selected for highway signs;

　　2. Strictly follow the national standard GB 5769.2-2009 for production;

　　Craftsmen with over 10 years of experience, independently mold making, and exquisite craftsmanship.

　　Mass production manufacturer for transportation engineering

　　1. Serving over 1000 transportation facility manufacturers;

　　2. Manufacturers of traffic signs, manufacturers sell them, saving intermediary fees;

　　3. Traffic signs offer high cost-effectiveness, and we welcome you to compare prices from three different sources.

　　Our company's project has covered all counties and towns in Diqing city, and we provide free technical guidance. Diqing Road Traffic Sign Manufacturer, Diqing Traffic Sign Production, Diqing Road Sign Pole Processing, Diqing Traffic Sign Pole, Diqing Scenic Area Indicator Manufacturer, Diqing Tourism Scenic Area Sign, Diqing Traffic Sign Production Manufacturer, Diqing Traffic Sign Manufacturer, Diqing Traffic Safety Sign, Diqing Safety Warning Sign, Diqing Traffic Sign Pole Customization, Diqing Hot Dip Galvanized Traffic Sign Pole Manufacturer, Diqing Multi pole Traffic Sign Pole, Diqing Expressway Sign Label Manufacturer

　　Installation method of road signs

　　1. The quality of all traffic sign components transported to the construction site shall comply with relevant technical standards and be approved by the supervising engineer before use;

　　2. After arriving at the site, make full use of safety facilities such as signs and road barriers to manage pedestrians and traffic, and strictly follow the operating rules for construction to ensure the safety of pedestrians and operators, prevent accidents as much as possible, and ensure construction safety;

　　3. Strictly follow the requirements of the construction drawings and determine the location of the signs based on the direction of traffic flow;

　　4. After determining the foundation position, excavate the foundation according to the dimensions specified in the design drawing, and process it according to the regulations. Then, erect the formwork, tie the steel bars, pour the concrete, and ensure that the position of the anchor bolts and base flanges is correct and reaches the specified elevation;

　　The installation of the sign support structure should be carried out after the strength of the foundation concrete meets the requirements and is approved by the supervising engineer. The flange of the pillar and the base flange of the concrete foundation should be level and tightly fitted, and the anchor bolts should be properly matched. After tightening the bolts, the pillar should not tilt;

　　6. Fix the signboard on the pillar by sliding bolts, clamps and other connecting accessories; The distance between the inner edge of the sign board of the column sign and the edge of the road shoulder should be ensured to be 20cm, the height of the lower edge of the single column sign board from the road surface should be ensured to be 250cm, and the clearance for cantilever installation should be ensured to be 5.2m from the road surface;

　　7. After installing the signboard, the verticality and height of the signboard should be checked and adjusted to meet the specified requirements;

　　8. When installing cantilever signs, the sign panel should be perpendicular to the centerline of the road. When installing roadside column signs, the sign panel should be as perpendicular or angled as possible to the centerline of the road: guidance and warning signs should be at an angle of 0-10 degrees, prohibition and indication signs should be at an angle of 0-45 degrees, and sight guidance signs should be at an angle of 80-90 degrees;

　　After the installation of the signboard is completed, all signboards should be cleaned to keep the layout clean.

　　Diqing Expressway Sign Double Suspension Rod Processing Factory Company Direct Delivery

　　Our factory provides very convenient conditions for the raw materials of traffic sign poles (steel pipes, flanges, stiffeners), ensuring that our company has a strong competitive advantage in the same industry. We mainly produce traffic sign poles, highway sign poles, cantilever sign poles, various types of lamp poles, and road sign boards

　　Diqing Expressway Sign Double Suspension Rod Processing Factory Company Direct Delivery

　　Our main products include traffic signs, highway signs, road signs, highway signs, signage signs, road construction signs, highway signs, scenic area signs, reflective signs, etc. We offer competitive prices and rely on our exquisite technology, thoughtful service, cost-effective product quality, and good reputation to establish ourselves

　　Next:

AfterSalesService :

• Highway signs