Equipment for Hefei Veterinary Drug Production Line

Description :

　　Automatically complete empty box detection, empty box conveying (including turning conveying), empty box positioning, solid box conveying (including turning conveying), positioning vibration compaction, and automatic box sealing.

　　C、 Automatic packing machine

　　Automatically complete the automatic conveying, feeding, counting, arranging, and filling of material packages. The packing methods include parallel robots, three-dimensional Cartesian coordinate manipulators, drop off robots, etc.

　　D、 Automatic folding and sealing machine

　　E、 Weight sorting machine (including removal machine)

　　F、 Electrical control system

　　1、 Production plant and capacity requirements

　　1. Factory building: Located on the floor of the factory building, ingredients, feeding, mixing, and packaging are all distributed on this floor, arranged in a straight line on one floor. The height of the factory building is not * * 4.5 meters. To facilitate feeding, dig a 1.7-meter-deep pit for installing a batching bin. (For those who are not allowed to dig pits, simply adjust the configuration plan and create a batching platform.)

　　2. Capacity: The production capacity of the production line is approximately 0.8-1 tons/hour (calculated based on 500g/bag specifications, depending on material characteristics).

　　3. Technical parameters

　　(1) Packaging materials: powder, powder, premix, additives, disinfectants, powdered materials.

　　(2) Production capacity: 0.8-1 tons/hour.

　　(3) Packaging specification: 500g/bag.

　　(4) Measurement accuracy: 500g ± 5g

　　(5) Packaging speed: 500g/bag 25-35 bags/minute

　　(6) Power supply: AC380V, 50Hz. The gas source should be provided by the user themselves.

　　2、 Specify functions, production processes, and equipment configurations

　　1. Specify functions

　　1.1 Mix various powdered materials according to the weight ratio specified in the formula, manually mix them, and have the production line automatically mix each material

　　Uniform and automatically lifted, stored, and divided, automatically measured, filled, and packaged according to 500g/pack specifications.

　　1.2 After manual measurement (batching) of raw materials, they are put into the raw material warehouse and directly lifted to the mixer through air flow conveying.

　　1.3 The uniformly mixed materials are automatically fed into the high-level transition material bin through the pneumatic conveying feeding method, and are fed by a horizontal spiral feeder

　　The material is automatically fed into the conical material bin of the measuring machine, and all material bins have automatic level control switches. According to the requirements of the production process, the actions of the feeding machine and feeder are automatically controlled.

　　1.4 Use sheet film (composite packaging film) to quantitatively subcontract qualified products, with fully automatic measurement, bag making, filling, and packaging

　　Loading and transportation require tight sealing and good sealing performance.

　　The process flow design, equipment structure design, and material selection of the 1.5 production line shall comply with relevant industry standards and comply with GMP

　　The requirements for certification and the process requirements of Party A. All materials of the equipment, except for the supporting electrical components such as motors and control components, are made of 304 stainless steel,

　　No hidden material dead corners, the inner and outer surfaces should be smooth and flat, avoiding protrusions, depressions, and sharp angles, and convenient for manual cleaning. When cleaning

　　With measures such as air blowing, the equipment can be easily cleaned, washed with water, and convenient for sewage collection.

　　1.6 As the material is powder, it is required that there be no dust leakage from each production station. The production line equipment adopts a fully enclosed design that is sealed and dust-proof,

　　Reduce dust pollution during the production process.

　　1.7. Smooth logistics, high degree of automation, and reduced manual labor.

　　Mixing evenly, measuring and sealing tightly, beautiful bag shape, good system stability, and stable output.

　　1.9 Each main equipment is equipped with a standing control panel.

　　2. Production process (fully automated with a main control cabinet for unified control)

　　Multiple raw materials are sieved and weighed, manually mixed, manually fed through a feeding port, vacuum feeding system (one end connected to the feeding port and the other end connected to the mixing machine feeding port), automatic mixing, vacuum feeding system, high-level transition silo (automatic level control), horizontal screw automatic feeding, spiral automatic measuring machine (automatic level control), vertical automatic packaging machine, automatic weight selection (including automatic discharge of unqualified packages, optional equipment), automatic conveying of finished packages, and manual packing in the outsourcing room.

AfterSalesService :

• Equipment for Hefei Veterinary Drug Production Line