Stainless steel material for roller crusher

Description :

　　Anhui Xinyuan roller crusher adopts 304 stainless steel material, with a large crushing capacity of 800 rows. The two rollers rotate in opposite directions to squeeze and crush the material. The crushing speed is fast, the amount is large, the rollers do not stick, the operation is simple, reliable, there are no vulnerable parts, no dust, and no auxiliary dust removal equipment is needed. The feed inlet is equipped with a broken block toothed roller. Even with a small amount of clumping, it will not block and work continuously. This device can be made into fixed and mobile according to customer service requirements. 4、 Equipment installation: Place the equipment flat on the floor or platform, fill it flat, and prevent it from shaking during operation. Equipment adjustment: After the equipment is in place, check whether the bolts of each component are loose and tighten them securely. Pull the drive belt without power to make the rolling mill idle. If a stuck phenomenon is found, the gap between the two rollers can be adjusted to solve the problem (there are gap adjustment devices at both ends, marked with the direction of looseness and tightness adjustment. Generally, the position has been adjusted when it leaves the factory). Power supply: XYSG800 consists of 7.5kw x 2 motors (yx3-132s-4), all of which are from Wannan Motors. The power supply is 380V three-phase electricity. After connecting the controller, first jog the equipment and refer to the direction of the arrow rotation. If there is a reversal, adjust the wiring phase. Anhui Xinyuan crusher welcomes you to call for consultation. If you are unsure about the situation, please call to inquire. The 800 type stainless steel crusher has fast crushing speed, large crushing capacity, independent electronic control, and simple and convenient operation.

AfterSalesService :

• Roll crusher