Dezhou Liquid Fertilizer Filling Production Line

Description :

　　Dezhou Liquid Fertilizer Filling Production Line

　　(1) Various materials such as magnesium, potassium dihydrogen phosphate, potassium chloride, etc. are manually mixed according to the weight specified in the formula, automatically mixed evenly, and automatically measured, filled, and packaged according to the specification of 5-25Kg/bag.

　　(2) The raw material package is placed on the platform and manually unpacked, measured, and directly poured into the mixer.

　　(3) Due to the presence of crystalline water in some materials, they are prone to moisture absorption and liquefaction at high temperatures. Therefore, it is required to have fast batching and mixing speeds, and to reduce the contact time between materials and air during the production process to prevent moisture absorption and re emergence.

　　(4) The process flow design, equipment structure design, and material selection of the production line meet the requirements of anti-corrosion, and the equipment can be easily cleaned. All parts in contact with the material are made of stainless steel.

　　(5) Require uniform and efficient mixing.

　　(6) Use pre made plastic woven bags, including an inner bag made of composite film, with the inner bag heat sealed and the outer bag sewn with thread; Semi automatic filling and sealing of manual bagging; Require tight sealing and good sealing performance.

　　(7) Compact equipment layout, low energy consumption, energy-saving and efficient.

　　(8) Easy operation and maintenance, stable performance, low failure rate, and reliable operation.

　　Dezhou Liquid Fertilizer Filling Production Line

　　1. Five sets of stainless steel weighing sensors and their suspension systems.

　　3. One set of weighing system support frame, connected to the weighing suspension system, supporting the weighing hopper.

　　4. Two sets of weighing bucket door opening and closing mechanisms, made of 304 stainless steel structure, with pneumatic material opening and closing doors.

　　5. One guide plate and bracket are used to guide the material unloaded from the hopper into the mixer. The guide plate is made of 304 stainless steel and has a thickness of 4mm.

　　The batching system completes the batching of each material in the set order. Upon receiving the discharge signal from the control system, the weighing hopper's door opening and closing mechanism will activate to open the material door for discharge; The material is discharged completely and automatically shuts off

　　Material gate, start the next material discharge process. After all the materials are put away. Close the material door and signal the next process.

　　6. Security design. The weighing hopper material door is equipped with a dual detection device. Only when the material door is confirmed to be completely closed, will the next batch of ingredients begin; Ingredients should only be started after they are finished.

　　working principle

　　1. The V-shaped batching belt realizes the weight reduction scale feeding into the reaction kettle, with a fully enclosed design, and enters different reaction kettles through forward and reverse rotation. To improve the overall efficiency of water agent ingredients. Clean up and maintain

　　Convenient protection;

　　2. The centrifugal pump is designed with a stainless steel structure that meets the requirements of composite food hygiene. It can be linked with the level sensing switch of the metering high-level mixing tank to automatically control the start and stop of pumping work without manual intervention. that

　　The machine is suitable for automatic pumping of various fluids. High temperature resistance, no damage to pumped materials, smooth operation, and no noise; easy to maintain

　　3. Reactor

　　Specification 3000L, vertical, three-layer with mixing and insulation, material: The inner and outer pots are made of 304 stainless steel, the outer insulation board is made of stainless steel, and the insulation material is rock wool. Steel plate thickness: inner 5mm, jacket 4mm

　　2mm foreskin;

　　Heating method: electric heating, with a total heating power of 72KW (controlled in four sections, each with a power of 18kw)

　　Mixing device: motor power 5.5KW, 60r/min;

　　1) Import and export: one solid feeding port, three liquid feeding ports (with a reserved hole diameter of 50mm), and one discharge port; (Install an online pH monitoring instrument with one probe per reactor)

　　Dezhou Liquid Fertilizer Filling Production Line

AfterSalesService :

• Dezhou Liquid Fertilizer Filling Production Line