Manufacturer of liquid organic bio fertilizer equipment

Description :

　　Manufacturer of liquid organic bio fertilizer equipment

　　This equipment adopts electrical integrated automatic control. The core components of the control device are imported

　　The programmable logic controller (PLC) is equipped with a text display for human-machine dialogue on the operation interface

　　Intuitive and simple, with high reliability in equipment operation.

　　Manufacturer of liquid organic bio fertilizer equipment

　　1. Five sets of stainless steel weighing sensors and their suspension systems.

　　3. One set of weighing system support frame, connected to the weighing suspension system, supporting the weighing hopper.

　　4. Two sets of weighing bucket door opening and closing mechanisms, made of 304 stainless steel structure, with pneumatic material opening and closing doors.

　　5. One guide plate and bracket are used to guide the material unloaded from the hopper into the mixer. The guide plate is made of 304 stainless steel and has a thickness of 4mm.

　　The batching system completes the batching of each material in the set order. Upon receiving the discharge signal from the control system, the weighing hopper's door opening and closing mechanism will activate to open the material door for discharge; The material is discharged completely and automatically shuts off

　　Manufacturer of liquid organic bio fertilizer equipment

　　1. The V-shaped batching belt realizes the weight reduction scale feeding into the reaction kettle, with a fully enclosed design, and enters different reaction kettles through forward and reverse rotation. To improve the overall efficiency of water agent ingredients. Clean up and maintain

　　Convenient protection;

　　2. The centrifugal pump is designed with a stainless steel structure that meets the requirements of composite food hygiene. It can be linked with the level sensing switch of the metering mixing tank to automatically control the start and stop of pumping work without manual intervention. that

　　The machine is suitable for automatic pumping of various fluids. High temperature resistance, no damage to pumped materials, smooth operation, and no noise; easy to maintain

　　3. Reactor

　　Specification 3000L, vertical, three-layer with mixing and insulation, material: The inner and outer pots are made of 304 stainless steel, the outer insulation board is made of stainless steel, and the insulation material is rock wool. Steel plate thickness: inner 5mm, jacket 4mm

　　2mm foreskin;

　　Heating method: electric heating, with a total heating power of 72KW (controlled in four sections, each with a power of 18kw)

　　Mixing device: motor power 5.5KW, 60r/min;

AfterSalesService :

• Manufacturer of liquid organic bio fertilizer equipment