Oushenglang NSC9720 anti glare floodlight projection light metal halide light 70W100W projection light pole

Description :

　　Product Overview

　　It mainly consists of aluminum alloy shell, tempered glass cover, light bulb, ballast and other parts

　　Suitable for

　　Mainly suitable for large-scale floodlighting in factories and enterprises such as power distribution rooms, factories, overpasses, corridors, water pump rooms, etc

　　Performance Specifications

　　This lamp is an integrated structure, with a high-temperature resistant silicone rubber seal on the joint surface, and a protection performance of up to IP65. It can be used both indoors and outdoors;

　　The shell is made of lightweight alloy material and high-tech spraying technology, ensuring that it will never corrode or rust in humid and high-temperature harsh environments;

　　The lamp is equipped with international high-quality ballasts, which have stable working performance, low power consumption and temperature rise, and long service life; In addition, compensation capacitors are installed with a power factor of over 0.90;

　　By using protective angle design and mirror coating technology, the glare control ability is strong, which can effectively reduce the stimulation of light on the eyes of workers, avoid discomfort and fatigue;

　　The light source chamber adopts a fast opening method for easy installation and maintenance, and is thermally isolated from the electrical chamber;

　　Has good electromagnetic compatibility and will not cause electromagnetic interference to the surrounding environment or electrical equipment;

　　The outlet of this lamp is equipped with a dedicated cable sealing device

　　Technical Specifications

　　Rated voltage 220VAC 50Hz

　　Shell protection IP65

　　Insulation level I

　　Anti corrosion grade WF2

　　Inlet thread G3/4

　　Introduce cable with a diameter of 6~18mm

　　Distance to height ratio 2.2

　　Dimensions 340 × 270 × 193mm

　　Total weight 4.5Kg

　　NSC9720 Anti glare Street LightPrecautions

　　Please carefully check whether there is any product damage during transportation, such as scratches, cracks, broken glass and light bulbs, etc., when receiving the goods;

　　After unboxing the product, please check if the accessories inside the packaging box are complete, such as the user manual, product certificate, installation accessories, etc;

　　After the installation of the lighting fixtures, it is necessary to check whether the wiring method of the fixtures is correct and whether the installation is firm before supplying power. Only after ensuring safety can the power be supplied normally;

　　When installing and replacing light bulbs, use bulbs of the same type and power; If the type or power of the light bulb is changed, the corresponding matching ballast should be replaced;

　　There is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; The center temperature of the transparent component is high and should not be touched;

　　The cold start time of the light source is (3-10) minutes. It is normal for the bulb to not restart under high temperature conditions. It is recommended to wait for the bulb to cool down slightly before restarting;

　　When disassembling, assembling, and maintaining lighting fixtures, they should be operated by personnel. If any abnormal phenomena are found, the power should be cut off and reported for repair. Non dedicated maintenance personnel are not allowed to carry out repairs without authorization;

　　Before operation, the power must be disconnected and the lighting fixtures must be reliably grounded.

AfterSalesService :

• Anti glare street light
• anti glare floodlight