NSC9720 anti glare projection light LED power plant substation three proof platform light 40W tunnel light

Description :

All products of our manufacturer are default to our own products, Oushenglang. If you need an invoice or OEM, please let us know;

Please contact customer service or call

To meet the needs of anti glare lighting for railway tunnels, highway bridges, public venues, and various production enterprises, the newly developed NSC9720 anti glare street lamp is widely used for road and channel floodlighting in tunnels, roads and bridges, large facilities, factories, stations, and other places.

Performance characteristics:
● Adopting protective angle design and mirror coating technology to achieve anti glare effect, which can effectively reduce eye irritation to operators and construction personnel. Avoid discomfort and fatigue. Selected gas discharge light source. High light efficiency, long lifespan, power factor greater than 0.9, good transparency, and a lifespan of up to 10000 hours.
Special surface coating and sealing treatment ensure that the lamp will never corrode or rust in harsh environments such as humidity and high temperature. Multi seismic structure design and high-strength alloy shell ensure its long-term safe operation in high-frequency vibrations such as roadbeds, tracks, bridges, and tunnels. There are various installation methods such as seat, ceiling, and wall mounted, and the irradiation angle can be adjusted within a large range of 180 degrees up and down according to environmental needs.

Technical Specifications:
Rated voltage: V 220
● Light source LED 40W

● Average service life: h 100000

● Fuse specification: A3
● Cable introduction:φ 8~φ 10mm 
● Dimensions:  Length * Width * Height 340 * 270 * 193mm;
Weight: 4.6Kg

Usage:
1. According to the on-site environment and lighting needs, determine the installation position and method of the lamps and fix them for installation. Prepare the corresponding length of cable according to the distance from the lamp to the 220V power supply contact.
2. Unscrew the two butterfly bolts that secure the upper part of the lamp to the front cover, open the front cover, and introduce one end of the prepared cable into the lamp chamber through the clamping nut of the introduction device. Connect the wires according to the polarity indicated on the wiring socket, and then tighten the clamping nut of the introduction device.
3. Close the front cover, tighten the two butterfly bolts on top, and then connect the other end of the cable to a 220V power supply to illuminate.
4. When multiple lamps are used in parallel, the cable should be wired according to the above method from another introduction device, and then connected to other lamps; When using a single lamp, plug the idle introduction device with a plug.
5. Loosen the fixing screws on both sides of the bracket to adjust the lighting angle of the lamp within a range of 15 degrees up and down.
6. The inner side of the lamp chamber is equipped with a support rod, which can be lifted as needed after opening the lamp cover.

Notes:
● 1. During transportation, the lamps shall be installed in the cartons provided, and foam shall be added for shock absorption.
When in use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; The center temperature of the transparent component is relatively high and should not be affected; Touch.
When replacing light bulbs, try to use bulbs of the same model as much as possible; If the type or power of the light bulb is changed, the matching ballast should be replaced accordingly.
4. The temperature resistance of the cable introduced into the lamp chamber should not be lower than 120 ℃ (such as silicone rubber, polytetrafluoroethylene cable, etc.).
Warning: 1. Do not install directly on combustible materials;
                2. Replace any cracked protective screens;
                3. When installing and maintaining lighting fixtures, the power must be disconnected first;
                4. The lighting fixtures must be reliably grounded.

AfterSalesService :