FW6580 locomotive work light 36W explosion-proof LED floodlight 36V oil station oil depot special explosion-proof light

Widely applicable to hazardous environments such as oil extraction, refining, chemical engineering, as well as offshore oil platforms, oil tankers, etc. Suitable for energy-saving renovation projects and places where maintenance and replacement are difficult.

Suitable for factory or road lighting. Suitable for Zone 1 and Zone 2 locations in explosive gas environments.

Suitable for Class IIA, IIB, IIC explosive gas environments. Suitable for temperature groups T1-T4.

Three specifications of products are available: floodlights, floodlights, and road lights.

1. Light source module: using high brightness LED light source, combined with high-efficiency constant current driving power supply, saving up to 60% electricity compared to gas discharge lamps; All LED components are sealed, waterproof and dustproof, and do not require internal cleaning and maintenance; The circuit substrate has low thermal resistance, and the specially designed module circuit ensures that each unit failure will not affect the normal operation of other components.

2. Power module: high-efficiency constant current drive power supply combined with intelligent power adjustment period; Equipped with luminous flux compensation function, reducing light attenuation and ensuring the light efficiency of LED light sources; It has overvoltage protection, overcurrent protection, and surge current protection functions.

3. Heat dissipation module: The explosion-proof lamp housing is made of aluminum alloy high-pressure casting, and the surface is shot blasted and then subjected to high-pressure electrostatic spraying, effectively providing the heat dissipation performance of the housing; The aluminum substrate is tightly attached to the aluminum alloy shell, which can instantly convert point heat sources into surface heat sources, doubling the heat dissipation area and facilitating rapid heat dispersion, thereby improving heat dissipation efficiency; The surface of the shell has diversion and dispersion grooves, which use air flow to carry away heat; The high density of heat sinks provides a large heat dissipation area, fully ensuring the heat dissipation requirements of LEDs and prolonging their service life.

4. Light distribution module: Specially designed light distribution components for each type of lamp, fully utilizing the performance of the lamp; Without ultraviolet radiation, it can provide lighting and health protection for users who work indoors for a long time; Wall mounted installation with adjustable rotation angle, cable wiring, ceiling mounted, embedded installation can use cable or steel pipe wiring.

Explosion proof mark: Exdemb II CT4

Working voltage: AC/DC 220V± 20% 50Hz

Rated power: 40/50/60/70W

Light source color temperature: Warm white 2700-4500K/Positive white 5000-6500K

Power factor: 0.98 LED luminous flux: 4000-7000Lm

Protection level: IP66

Anti corrosion grade: WF2

Introduction device: G3/4;

Introduction port specifications, suitable forΠ 10mm～Φ 14mm cable

Installation methods: ceiling mounted, wall mounted, embedded, street lamp mounted

Product weight: 8.3kg

Dimensions: 330× 255× 165mm