BRE8620 Oil Depot Oil Station LED Explosion proof Lamp Dust Workshop Sandblasting Room Explosion proof Ceiling Lamp 60/70/80W
BRE8620 Oil Depot Oil Station LED Explosion proof Lamp Dust Workshop Sandblasting Room Explosion proof Ceiling Lamp 60/70/80W

BRE8620 Oil Depot Oil Station LED Explosion proof Lamp Dust Workshop Sandblasting Room Explosion proof Ceiling Lamp 60/70/80W

Category:

lighting/Outdoor lighting fixtures/Searchlight

Model:

Brand:

Bright Gathering Fortune

Retail Price

Negotiable


重量

kg

  • Product Description
  • Description :

    BRE8620 Oil Depot Oil Station LED Explosion proof Lamp Dust Workshop Sandblasting Room Explosion proof Ceiling Lamp 60/70/80W

    1a

    微信图片_20180921134959

    undefined

    微信图片_20180921134941

    微信图片_20180921134947

    dimensional diagram
    undefined

    Product Description: How to Translate
    *The explosion-proof type of the lamp is explosion-proof or dust explosion-proof, suitable for lighting in gas or dust explosion hazardous areas;
    *The lighting fixture consists of a light source chamber, an electrical chamber, and a wiring chamber, with a sealed design;
    *The lamp is made of aluminum alloy die-casting, and the electrical chamber contains LED switch power supply, wiring terminals and other electrical appliances. The wiring chamber contains user wiring terminals
      There is an aluminum alloy mirror reflector inside the source cavity;
    *The tempered glass transparent cover is sealed with epoxy resin, which has high transparency and strong impact resistance. The mesh cover is made of stainless steel and coated with polyester powder on the surface
      The anti-corrosion shell is treated with special metal coating and then coated with polyester powder on the surface;
    *The exposed fasteners of the lamp are made of stainless steel and equipped with rubber gaskets for reliable sealing and strong waterproof, dustproof, and corrosion-resistant properties. Built in rubber
      The components, wire sheaths, and plastic are all made of high-temperature and flame-retardant parts, which are safer and more reliable;
    *The lamp is suitable for various installation methods such as pipe hanging, ceiling mounted, wall mounted, pole mounted, and bracket mounted;
    *The power supply adopts integrated heat dissipation technology, with short circuit, overcurrent, overvoltage, and over temperature protection;
    *Luminaires have long lifespan, high brightness, good seismic resistance, beautiful and elegant appearance, and require no maintenance for long-term use. It is an ideal explosion-proof lamp that is energy-saving and environmentally friendly
      The tool.

    Working conditions:
    *The installation location shall not exceed an altitude of 2000m;
    *The ambient temperature is -40 ℃ -40 ℃, and the average temperature value within 24 hours does not exceed+35 ℃;
    *The relative humidity of the surrounding air is not greater than 95% (+25 ℃);
    *In places without severe vibration, impact, or shaking;
    *Suitable for Zone 1, Zone 2, Class IIA, IIB, IIC, and T1-T6 explosive gas environments.

    Scope of application:
    Suitable for indoor and outdoor lighting in Zone 1 and Zone 2 hazardous areas or Zone 20, Zone 21, and Zone 22 explosive or flammable dust areas with temperature groups of T1-T6 in Class IIA, IIB, and IIC environments containing explosive gases or vapors.

    Main technical parameters:

    Product ModelOBG8620
    execution standardGB3836 (equivalent to IEC60079, EN series standards)/GB12476 (equivalent to IEC61241, EN series standards)
    Explosion-proof markingExdⅡC T6 Gb/DIP A20 TA,T6
    rated voltage90-264VAC or 127-300VDC
    frequency range47-63Hz
    rated power30W-80W
    power factor110/0.98 220/0.95
    Power efficiencyzero point eight eight
    Light source luminous flux3500(30W)/5850(50W)/9300(80W)
    Lamp efficiency85%
    Color Rendering Index≥75
    inrush currentcold boot; 30A (large) 230VAC
    Safety RegulationsUL8750,TUV EN61347-1,EN61347-2-13
    Electromagnetic compatibility standardsEN61000-3-2,TUV EN61347-1,EN61347-2-13
    Protection levelIP66
    corrosion resistance gradeWF2
    Inlet threadG20
    Cable specificationsΦ 10-Φ 14mm
    Installation methodSuspension rod type, wall mounted type, ceiling mounted type, bracket type, street lamp type
    working environmentTemperature: -40-45 ℃ Humidity: 10% -90%
    working life

    ≥50000H

    Product weight5.0kg

     

    AfterSalesService :

    Key words: