Yawei vertical machining center high rigidity heavy cutting CNC machine tool equipment
Category:
mechanical equipment/machine tool/machining center
Model:
VP2012
Brand:
Yawei
Spindle taper:
BT50
spindle speed:
8000-12000 rpm
positioning accuracy:
±0.005 mm
Repetitive positioning accuracy:
±0.003 mm
Tool magazine capacity:
24/30/40
control system:
Fanuc/Siemens
Fast moving speed:
24/36 m/min
Maximum load-bearing capacity:
800-1500 kg
Retail Price
10,000,000.00USD
重量
kg
- Product Description
-
Spindle taper BT50
spindle speed 8000-12000 rpm
positioning accuracy ±0.005 mm
Repetitive positioning accuracy ±0.003 mm
Tool magazine capacity 24/30/40
control system Fanuc/Siemens
Fast moving speed 24/36 m/min
Maximum load-bearing capacity 800-1500 kg
Description :
Yawei vertical machining center is a high-precision CNC machining equipment designed specifically for precision mold manufacturing, automotive parts processing, and aerospace structural component production. This equipment effectively solves the problems of poor surface roughness and dimensional deviation caused by vibration in traditional machining through a high rigidity bed structure and optimized dynamic design. It is suitable for semi precision machining and precision machining of medium and large complex surfaces, and can significantly improve production efficiency and product consistency. It is one of the core equipment in modern intelligent manufacturing workshops.
The Yawei vertical machining center adopts high-quality Mihanna cast iron bed body, which has undergone secondary tempering treatment to eliminate internal stress and ensure long-term geometric accuracy stability. The spindle is usually equipped with BT40 or BT50 standard interfaces, supporting direct or belt transmission, with a speed range covering 8000 to 12000rpm, meeting the diverse cutting needs of cutting tools. The XYZ three-axis is driven by high-precision ball screws and designed with linear or hard rails. The positioning accuracy can reach ± 0.005mm, and the repeated positioning accuracy is ± 0.003mm, which meets the international ISO standard inspection specifications and has excellent thermal deformation compensation capability.
When selecting the Yawei vertical machining center, it is important to consider the size range, material hardness, and process complexity of the processed workpiece. For rough machining of large molds or heavy parts, it is recommended to choose hard rail models to obtain stronger cutting rigidity; For high-speed milling of small precision parts, wire rail models have more advantages. Attention should be paid to distinguishing its application boundaries from gantry machining centers. The former is suitable for flexible production of small and medium-sized single pieces, while the latter is more suitable for ultra large size workpieces. If the processing requirements involve complex angles of the pentahedron, it is necessary to confirm whether a fourth axis rotating worktable is equipped to avoid cumulative errors caused by multiple clamping.
When installing the Yawei vertical machining center, it is necessary to ensure that the foundation is stable and horizontally adjusted in place. The external air source pressure should be stable at 0.5-0.7MPa to ensure smooth tool changing action. Daily maintenance should regularly check the cleanliness of the spindle taper hole, the smoothness of the lubricating oil circuit, and the concentration of the coolant. It is recommended to replace the gearbox lubricating oil every 500 hours of operation. Common faults such as spindle overheating or abnormal feed are often caused by insufficient lubrication or sensor signal interference, and need to be promptly investigated. Reasonable usage cycle management includes daily start-up preheating and regular laser interferometer accuracy calibration to extend equipment lifespan and maintain processing accuracy.
AfterSalesService :
24小时Key words:
