Wholesale price of disposable medical surgical masks manufacturer for adult ear hanging three-layer protection
Wholesale price of disposable medical surgical masks manufacturer for adult ear hanging three-layer protection

Wholesale price of disposable medical surgical masks manufacturer for adult ear hanging three-layer protection

Category:

Security/Respiratory protection/Disposable Face Mask

Model:

Strap type, hanging ear type

Brand:

Donper

brand:

Donper

model:

Strap type, hanging ear type

type:

surgical mask

material:

Non woven fabric+melt blown fabric

Specifications:

17.5cm*9.5cm

Scope of Application:

Epidemic areas, infectious disease wards, densely populated areas, etc

Processing & Customization:

yes

Is it imported:

No

Place of Origin:

Shandong

Retail Price

2.00USD


重量

kg

  • Product Description
  • brand

    Donper

    model

    Strap type, hanging ear type

    type

    surgical mask

    material

    Non woven fabric+melt blown fabric

    Specifications

    17.5cm*9.5cm

    Scope of Application

    Epidemic areas, infectious disease wards, densely populated areas, etc

    Processing & Customization

    yes

    Is it imported

    No

    Place of Origin

    Shandong

    Description :

      Wholesale price of disposable medical surgical masks manufacturer for adult ear hanging three-layer protection

      User Manual for Disposable Medical Surgical Masks

      [Product Name] Disposable Medical Surgical Mask

      [Specification and Model] 17.5cm × 9.5cm Tolerance: ± 5%

      【 Production Enterprise Name 】 Shandong Zhushi Pharmaceutical Group Co., Ltd

      [Address of Production Enterprise] South of Fanlou Road, Shan County Development Zone

      [Production License Number] Lu Shi Yao Jian Xie Production License No. 20140053

      [Product Registration Certificate Number] Lu Xie Zhuzhun 20192140064

      [Product Technical Requirement Number] Lu Xie Zhuzhun 20192140064

      【 Execution Standard No. 】 YY0469-2011 Medical Surgical Mask

      After spraying 1.2mL of synthetic blood at a pressure of 16.0kPa (120mmHg) onto the outer side of the mask, there should be no permeation on the inner side of the mask; The bacterial filtration efficiency of masks should not be less than 95%; 3. The filtration efficiency of masks for non oily particles should not be less than 30%; The pressure difference Δ p for gas exchange between the two sides of the mask should not exceed 49Pa/cm2; 5. The mask material should be non flammable, and the mask should burn for no more than 5 seconds after leaving the flame. 6. Ethylene oxide sterilization should be used, and the residual amount of ethylene oxide should not exceed 10 μ g/g; 7. Masks should be sterile.

      The main structural components are composed of a surface layer, a middle layer, a bottom layer, a mask strap, and a nose clip. The surface material is polypropylene spunbond fabric, the middle layer material is filter meltblown fabric made by polypropylene spinning method, the bottom layer material is polypropylene spunbond fabric, the mask strap is knitted from polyester thread and a small amount of spandex thread, and the nose clip is made of bendable and formable polypropylene.

      【 Scope of Application 】 Designed for clinical medical personnel to wear during invasive procedures, covering the user's mouth, nose, and jaw, providing a physical barrier to prevent direct transmission of pathogenic microorganisms, body fluids, particulate matter, etc.

      [Precautions and Warning]

      1. Medical surgical masks can only be used once;

      2. After the mask becomes damp, it should be replaced in a timely manner;

      3. Before entering the work area with a mask, a tightness check should be conducted;

      4. Masks should be replaced promptly after being contaminated by the patient's blood or bodily fluids;

      5. Do not use after packaging damage;

      6. The product should be used as soon as possible after opening;

      7. After use, the product should be disposed of in accordance with relevant medical waste regulations.

      【 Contraindications 】

      People with material allergies are prohibited from using it.

      [Instructions for Use]

      1. Open the product packaging, take out the mask, with the nose clip facing upwards and the edge facing outwards. Gently pull the ear strap to hang the mask on both ears, avoiding hand contact with the inside of the mask.

      2. Gently press the nose clip to make it fit the bridge of the nose, then hold down the nose clip. Pull down the lower end of the mask to the lower jaw, fully unfolding the folded edge.

      3. Organize the wearing effect of the mask so that it can cover the user's nose, mouth, and chin, and ensure the tightness of the mask.

      Transportation and storage: Transportation vehicles should be clean, hygienic, and isolated from sources of fire. This product should be stored in a dry and cool place, with attention to waterproofing and avoiding direct sunlight. It is strictly prohibited to store it together with toxic and harmful substances. This product should be stored indoors in a cool, dry, clean, dark, non corrosive gas, and well ventilated area.

      [Production Date] Please refer to the individual packaging for details

      After sterilization with ethylene oxide, the shelf life is two years.

    AfterSalesService :

    Key words:
    • Disposable medical surgical mask