Chengdu Telephone Cable Mining Communication Cable MHYAV30 * 2 * 0.8

Description :

　　The long-term allowable temperature for communication cables is -40 ° C to 50 ° C, with an average relative humidity of 25 ° C. Communication cables are allowed to be installed at a temperature not lower than -10 ° C, and the small bending radius of the cable is 15 times the outer diameter.

　　Characteristics of using mining cables:

　　1. The rated voltage U0/U of the power frequency is 380/660V, 660/1140V, 1.9/3.3kv, 3.6/6kv, 6/10KV, 8.7/10KV, 300/500V;

　　2. The high allowable working temperature for cable conductors is 65 ℃ and 90 ℃;

　　3. The cable allows a low working environment temperature of -35 ℃;

　　4. Cable bending radius: not greater than 6 times the outer diameter of the cable.

　　Development status of mining cables:

　　1. In recent years, there has been a lack of emphasis on adjusting the product structure in the wire and cable industry due to low-level repetitive construction. The contradictions in product structure are still prominent, and high-level products cannot meet the needs. For example, in terms of categories, China's bare wire production accounts for nearly 1/5, while developed countries only account for 1/10. In bare power lines, overhead lines and ordinary steel cored aluminum stranded wires account for the vast majority;

　　2. There are over 700 loss making enterprises in the industry with low economic benefits, accounting for more than a quarter of the total losses. The industry's sales revenue profit and tax rate was 11.7% in 1991 and decreased to 5% in 1995. Due to the continuous decline in profitability, an increase in loss making enterprises, and a general shortage of funds within the industry, the average asset liability ratio is as high as 70%;

　　3. The scale growth is too rapid, and the overall capacity of the wire and cable industry is more than twice the demand. The predicted demand for various product categories in 2000 is less than the production capacity.

　　Mining cable control core:

　　1. Increase the flexibility of coal mining machine cables used in coal mines;

　　2. Increase the relative slippage of the control wire core;

　　3. Increase the strength of cable conductors for coal mining machines used in coal mines;

　　4. Changing the conductor from the original bundle twisting structure to regular twisting can increase its bending performance, and then weaving steel wires outside the conductor to increase its strength;

　　5. The control wire core can be woven with a mixture of tinned copper wire and steel wire, which is also a good method.

　　Mining cable is the abbreviation for coal mine cable. Mining cables are all flame-retardant cables and should be issued with a mining product safety mark certificate by the National Mining Product Safety Mark Center. U-shaped (M-type) rubber sheathed cable for coal mines.

　　Tianjin Cable Factory Branch, with the spirit of unity, pragmatism, dedication, and dedication, has gained a high reputation in the market through the hard work and active exploration of all employees. Welcome customers to join hands with our company for contracts, mutual benefit, and common development!

AfterSalesService :

• Communication line for coal mines