Power cable KVV22-0.6/1KV 4 * 2.5 armored cable
Category:
communication/Communication cable/Other communication cables
Model:
PTYL23
Brand:
Tianlian
Retail Price
4.00USD
重量
kg
- Product Description
-
Description :
YJV YJV22YJV32
Product Usage: This product is suitable for power lines with a rated voltage (U0/U) of 3.6/6 to 26/35KV, for the purpose of power transmission and distribution.
2. Product standard: GB12706-91 rated voltage 35KV and below copper core, aluminum core plastic insulated power cables.
3. Product usage characteristics: (1) When laying cables in environments with temperatures not lower than 0 ℃, there is no need for pre heating. The laying height of cables is not limited. (2) The long-term allowable working temperature of the cable core shall not exceed the following regulations: for cables with an outer protective layer of polyvinyl chloride sheath, the temperature shall be 90 ℃; The outer protective layer of the cable is made of polyethylene sheath, and the temperature is 80 ℃. (3) When the wire core is short circuited (for a maximum of 5 seconds), the temperature shall not exceed 250 ℃. (4) The minimum bending radius for cable laying is specified as follows: single core cable: 20 (d+D) ± 5%; Three core cable: 15 (d+D) ± 5%. In the formula: D is the actual outer diameter of the cable, and d is the actual outer diameter of the conductor.
4. Product model, name, and scope of use
model
name
Scope of use
copper core
YJY
Cross linked polyethylene insulated polyethylene sheathed power cable
Fixed installation indoors, in cable trenches, tunnels, or underground
YJV22
Cross linked polyethylene insulated steel tape armored polyvinyl chloride sheathed power cable
Fixed installation in places with external pressure
YJV23
Cross linked polyethylene insulated steel tape armored polyethylene sheathed power cable
Fixed installation in places where external forces are often applied
YJV32
Cross linked polyethylene insulated fine steel wire armored polyvinyl chloride sheathed power cable
Fixed installation in places that require the ability to withstand tensile forces
YJV33
Cross linked polyethylene insulated fine steel wire armored polyethylene sheathed power cable
Fixed installation in places that require the ability to withstand tensile forces
YJV42
Cross linked polyethylene insulated thick steel wire armored polyvinyl chloride sheathed power cable
Fixed installation underwater, in vertical shafts, or in places where tensile strength is required
YJV43
Cross linked polyethylene insulated thick steel wire armored polyethylene sheathed power cable
Fixed installation in places that require the ability to withstand high tensile forces
Note: One or two single core cables are not allowed to be laid in iron pipes.
AfterSalesService :
Key words:- power cable
