HSGWP22-2 * 5L armored cable, flame-retardant cable

Description :

　　HSGWP22- Communication Category 5 Line 2X5L, Cable Shielding - Copper Wire Braided Shielding P-Copper Tape Shielding P2 Aluminum Plastic Composite Tape Shielding P3

　　Cable insulation - polyvinyl chloride V-polyethylene Y-cross-linked polyethylene YJ fluoroplastic F, F46

　　Cable Armor - Steel Strip Armor 22, 23- Steel Wire Armor 32, 33, 42, 43

　　Cable conductor - single conductor A-7 conductors B - multiple conductors R

　　Cable flame retardant - ordinary flame retardant ZR (ZRA, ZRB, ZRC) - low smoke halogen-free flame retardant WDZ, DWZ

　　Cable Fire Resistance - Cable Fire Resistance NH

　　Cable Explosion proof - Cable Explosion proof IA

HSGWP22-2X5L Communication Category 5 LineThis product is suitable for connecting electronic computers, testing instruments, and meters with high anti-interference performance requirements for rated voltages of 300/500V and below.

　　one HSGWP22-2X5L Communication Category 5 LineThe long-term working temperature of cable conductors: PVC has two types: 70 ℃ and 105 ℃; Polyethylene insulation at 70 ℃; Cross linked polyvinyl chloride insulation is 90 ℃.

　　2. The cable is allowed to be fixedly laid and used under the condition of ambient temperature of -40 ℃ to 50 ℃, and the environment during laying should not be lower than 0 ℃

　　3. For cables with copper tape shielding structure, the bending radius during laying should not be less than 12 times the outer diameter of the cable, and for other cables, the bending radius during laying should not be less than 6 times the outer diameter of the cable.

　　Flame retardant computer shielded cable, also known as twisted pair shielded cable | computer shielded cable | twisted pair shielded cable | split screen total screen cable | double screen twisted pair shielded flame-retardant cable | computer shielded control cable

　　HSGWP22-2X5L Cable Performance

　　Conductor resistance value ≤ 95 Ω? km

　　Resistance imbalance not exceeding 3%

　　Dielectric strength: No breakdown at 1kV/1min DC between conductors and between conductors and shields

　　Insulation resistance * minimum value greater than 150M Ω· km

　　Unbalanced capacitance: 100M Ω/m at 10MHz frequency

　　High transmission frequency: 100MHz

　　Any pair attenuation: 3.1dB/100m at 1 MHz and 33.0 dB/100m at 100 MHz.

　　Near end crosstalk: 62dB less at 1MHz, 32dB less at 100MHz

　　Characteristic impedance: 100 Ω

AfterSalesService :

• HSGWP22