Jia'ao round wing finned tube radiator, steel tube finned radiator

Description :

　　Jia'ao round wing finned tube radiator, steel tube finned radiator

　　The thickness of the circular flange gasket shall not exceed 3mm. The installation of the radiator is unstable. This is due to the mismatch between the curvature of the support hook and the radiator or the loose contact between the support hook and the furnace clamp, as well as the insufficient grounding of the column radiator legs. Measures should be taken to remedy this. The furnace hook is not securely fastened and not aligned properly. The planting hole is too shallow, the cleaning inside the hole is not clean, the cement grade is too low, or the mortar is not filled tightly, resulting in instability; Improper alignment or inaccurate positioning during insertion can cause the furnace hook and furnace card to be misaligned. Furnace blockage and insufficient fastening of furnace repair center. Due to the tightness of the thread, it is necessary to conduct a thread selection test before installation. The number and position of the column type radiator legs installed on the ground are incorrect.

　　Fin tubes are made by high-frequency welding technology with flake shaped fins, so do not collide or squeeze them during installation and use, as this can easily deform and even affect the heat dissipation effect. Due to the spiral distribution of finned tube scales, there may be some sediment and water rust layers during long-term use. We need to clean and sweep them in a timely manner.

　　The advantages and disadvantages of finned radiators: In industrial buildings with corrosive gases or environments with high relative humidity, corrosion-resistant finned tube radiators should be used; When using aluminum finned tube radiators, internal anti-corrosion aluminum finned tube radiators should be selected and meet the product's requirements for water quality.

AfterSalesService :

• Circular wing finned tube radiator