Jiaao Light Pipe Heat Sink Parameters D76 * 2000 * 4 Hebei Light Pipe Heat Sink Manufacturer
Category:
hardware/plumbing hardware /Radiator
Model:
D76*2000*4
Brand:
Jiaao
brand:
Jiaao
model:
D76*2000*4
structural type:
Pipe type
Principle Type:
Convective heat dissipation
material:
steel
Processing & Customization:
yes
Installation type:
wall-mounted
surface treatment:
Rust proof paint, silver powder
Specifications and Dimensions:
two thousand
Place of Origin:
Hengshui, Hebei
manufacturer:
Jiaao Heating
Retail Price
300.00USD
重量
kg
- Product Description
-
brand Jiaao
model D76*2000*4
structural type Pipe type
Principle Type Convective heat dissipation
material steel
Processing & Customization yes
Installation type wall-mounted
surface treatment Rust proof paint, silver powder
Specifications and Dimensions two thousand
Place of Origin Hengshui, Hebei
manufacturer Jiaao Heating
Description :
Jiaao Light Pipe Heat Sink Parameters D76 * 2000 * 4 Hebei Light Pipe Heat Sink Manufacturer
The advantages of snake tube drainage are simple structure, easy production, small liquid storage capacity, and strong applicability. Its main disadvantage is that the steam generated in the lower section of the exhaust pipe cannot be timely extracted and can only be discharged after passing through the entire length of the exhaust pipe, resulting in a low heat transfer coefficient and high resistance to gas-liquid two-phase flow. The commonly used U-shaped pipe is composed of two or four layers of smooth seamless steel pipes.
Can light pipe radiators be used in steam systems? Answer: Generally, only A-type light pipe radiators are used for steam, but if the pressure is not high, B-type radiators can also be used for steam systems.
Manufacturers of heat convection light pipe radiators mass produce light pipe radiators, which, like ordinary radiators, also require internal anti-corrosion treatment. This is an anti-corrosion measure that must be taken for any material of radiator, except for all copper waterway radiators. And some requirements have been put forward for its internal anti-corrosion treatment liquid, such as the anti-corrosion layer should be uniform, the adhesion should be stable, and no peeling is allowed, etc.
AfterSalesService :
Key words:- Parameters of light pipe radiator
More Products
