New material 7cm grass grid manufacturer

Description :

　　New material 7cm grass grid manufacturer wishes you to be surrounded by green mountains and waters at all times, may you be surrounded by blue skies and white clouds every day, may the environment around you be infinitely good, and may your mood be extremely wonderful. Kuaizhan Plastic Grass Grid Parking Space Grass Grid Greening Helper

　　Compared with traditional concrete grass planting bricks, firstly, the survival rate of plastic grass planting grids is much higher than that of grass planting bricks. Secondly, the grass planting area of plastic grass planting grids is three times larger than that of grass planting bricks (the grass planting area of grass planting grids is about 90%, and the grass planting area of grass planting bricks is about 30%). In addition, the weight of plastic grass planting grids per square meter is lighter than that of grass planting bricks (the weight of grass planting grids per square meter is 5KG, and the weight of grass planting bricks per square meter is 200KG). Plastic grass planting grids are easy to cut and the construction is relatively convenient.

　　Advantages of new material 7cm grass grid manufacturer

　　1. High strength, due to the use of plastic fibers, it can maintain sufficient strength and elongation in both dry and wet conditions.

　　2. Corrosion resistance, able to withstand corrosion for a long time in soil and water of different pH levels.

　　3. Good permeability is due to the presence of gaps between fibers, resulting in excellent water permeability.

　　4. Good resistance to microorganisms and insect infestations without damage.

　　5. Easy to construct, due to its lightweight and flexible material, it is convenient for transportation, laying, and construction.

　　New material 7cm grass grid manufacturer kindly reminds:

　　1. The contact surface between the grass planting grid and the supporting material should be as smooth as possible to prevent the film from being punctured and losing its anti-seepage effect. Otherwise, a fine-grained cushion layer should be set up to protect the film from damage.

　　2. The connection between the grass planting grid and the surrounding boundary. The grass planting grid must be tightly integrated with the surrounding boundary. During construction, anchoring grooves can be excavated and connected to the foundation and bank slope. Polyvinyl chloride and butyl rubber films can be well adhered to the concrete surface with adhesives or solvents, so the embedded length can be appropriately shorter. Since polyethylene films cannot adhere to the concrete surface, the length of embedded concrete should be at least 0.8m

　　3. The connection of the grass planting grid itself and the connection method of the anti-seepage film can be classified into three types, namely bonding method, welding method, and vulcanization method. The selection depends on the different raw materials of the anti-seepage film. The anti-seepage performance of all connection joints should be checked to prevent leakage due to poor joint connection.

　　New material 7cm grass grid manufacturer performance

　　1. Persisting in cleaning the grass grid increases its transparency, which is very beneficial for the growth of crops. Because the cloth strip can sway and scrub the greenhouse film with the wind at any time, it can improve the temperature inside the grass planting greenhouse and increase the output value.

　　2. Reduce labor intensity and improve the safety of vegetable production, so that there is no need to worry about standing on the top of the shed to clean the grass grid in cold weather.

　　3. Maintaining the grass grid reduces the damage to the greenhouse film caused by traditional cleaning methods, extends the use time of the grass grid, and reduces production costs.

　　Our business philosophy: continuous learning, surpassing self-service in the market, and contributing to society

　　Our mission: technology, innovation, cooperation, win-win

　　2、 Requirements for parking lot design:

　　1. The foundation soil should be compacted layer by layer, with a density of over 85%;

　　Lay a 350mm thick crushed stone load-bearing layer (600mm thick for fire exits) and flatten and compact it until it is dense;

　　3 layers of 20mm thick crushed stones and coarse sand as leveling layer;

　　4. Install landscape grass grids, and tightly fasten every 2 grass planting boards according to the tooth and hole positions;

　　Sprinkle planting soil on the grass grid in the scenic area, with a height of 1 centimeter from the upper opening;

　　6. Lay grass or sow grass. When laying grass, it is necessary to compact the grass. After watering and maintaining the grass, you can park it.

　　New material: 7cm grass grid manufacturer. The company mainly engages in the following business: grass grid drainage board, water storage and drainage board, geotextile, geonet, geomembrane, and geotextile materials. The price is reasonable and the quality is guaranteed

AfterSalesService :

• New material 7cm grass grid manufacturer