Metal mesh corrugated packing and stainless steel orifice plate corrugated Dier customization
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
SW-1 SW-2
Brand:
Pingxiang Dier
model:
SW-1 SW-2
type:
Corrugated packing
Loading method:
tidy up
Packing material:
metal
specific surface area:
six hundred and fifty
Processing & Customization:
yes
content:
ninety-nine
Implement quality standards:
Standard of the Ministry of Chemical Industry
Retail Price
3,280.00USD
重量
kg
- Product Description
-
model SW-1 SW-2
type Corrugated packing
Loading method tidy up
Packing material metal
specific surface area six hundred and fifty
Processing & Customization yes
content ninety-nine
Implement quality standards Standard of the Ministry of Chemical Industry
Description :
Metal mesh corrugated packing and stainless steel orifice plate corrugated Dier customization
1) Product Description of Metal Mesh Corrugated Filler
Metal mesh corrugated packing is a method of punching diamond shaped micropores on metal corrugated sheets while stretching the mesh holes. This packing combines the advantages of wire mesh and perforated corrugated packing. Metal mesh corrugated packing has the characteristics of high stacking strength, high flux, low pressure drop, large specific surface area, and separation. The effect is significant in the pre distillation tower and main distillation tower applied to methanol distillation units. The use of this filler can save energy, improve product quality, and increase production. In the renovation of the old tower, the output can be increased by 30%. In new projects, the tower height can be reduced by half.
Mesh ripple technology parameters:
model
Peak Height
mm
specific surface area
㎡/m3
Theoretical plate number
I/m
void ratio
%
pressure drop
Mpa/m
F factor
M/s(kg/m3)0.5
SW-1
four point five
six hundred and fifty
6-8
ninety-two
2-3.5×10-4
1.4-2.2
SW-1
six point five
four hundred and fifty
four point five
ninety-six
1.6-1.8×10-4
2.2.4
2) Metal orifice plate corrugated packing
The corrugated packing of metal orifice plate is made by stamping various metal thin plates with a thickness of 0.15-0.20mm. The plate is punched with small holes with a diameter of 4mm and several fine seams with a length of about 5mm, which enhances the wetting performance and may form bidirectional permeation. The opening rate is about 9-12%, and the perforated plate surface has a special texture to improve the effective mass transfer area. Its separation ability is similar to that of wire mesh corrugated packing, but its anti blocking ability is stronger than that of corrugated packing.
Product Technical Parameters
model
Peak height mm
specific surface area
Theoretical plate number
Void ratio%
pressure drop
F factor
Sm125
twenty-four
one hundred and twenty-five
1-1.2
ninety-eight point five
1.5×10-4
three
SM250
twelve
two hundred and fifty
2-3
ninety-seven
1.5-2×10-4
two point six
SM350
eight
three hundred and fifty
3.5-4
ninety-five
1.5×10-4
two
Sm450
six point five
four hundred and fifty
4-4.5
ninety-three
1.8×10-4
one point five
3) Metal wire mesh corrugated packing
Metal wire mesh corrugated packing is a disc-shaped packing composed of several corrugated wire mesh sheets pressed in parallel and arranged in a straight line. The corrugated sheets have an inclination angle of 30 ° or 45 °, and adjacent corrugated sheets have opposite directions. When filling inside the tower, the upper and lower plates of packing are staggered at a 90 ° angle, and the products are BX and CY types
Technical Specifications
model
Peak Height
mm
specific surface area
㎡/m3
Theoretical plate number
I/m
void ratio
%
pressure drop
Mpa/m
F factor
M/s(kg/m3)0.5
CY700
four point three
seven hundred
8-10
eighty-seven
4.5-6.5×10-4
1.3-2.4
BX500
six point three
five hundred
4.5-5.5
ninety-five
3.0×10
two
250 type
twelve
two hundred and fifty
2-3
ninety-seven
1.5-2×10-4
two point six
DZ1000
three point one
one thousand
12-14
seventy-five
8.2-10×10-4
2-2.4
Our company is a large-scale chemical packed tower internals enterprise in the domestic industry that integrates design and research and development, production equipment automation, installation and after-sales service, and technical guidance standardization (with 17 years of experience). It is a key supported industry for development, and its products are widely used in industries such as environmental protection, fine chemicals, petrochemicals, refining, coking, light industry metallurgy, steel plants, etc; The registered capital is 98 million yuan, fixed assets are 50 million yuan, and there are approximately 286 employees, including 26 technical personnel. We produce more than 100 products including environmental protection device fillers, ship smoke control fillers, plastic fillers, metal and ceramic fillers, tower internals, chemical equipment, etc. Especially in recent years, the business of environmental protection tower installations has been continuous, and the environmental protection tower installations that have been jointly designed and produced by our company, Hebei University of Technology, East China University of Science and Technology, Tianjin University, and Tsinghua University have been running well.
AfterSalesService :
Key words:- Mesh corrugated packing
More Products
