Jiangsu Quanfeng MCJC-7500 7.5kw industrial dust collector for absorbing graphite powder dust

Description :

　　The overall management of industrial plant exhaust gas, smoke and dust has always been a global challenge. Through introduction, absorption, integration, and improvement, Jiangsu Quanfeng Environmental Protection Technology Co., Ltd. has successfully developed a specialized industrial dust collector for the treatment of industrial factory waste gas and smoke dust. The design needs to adhere to two principles: firstly, to reduce the dust concentration around the dust producing point to a level that is not sufficient to affect the health of workers; secondly, not to interfere with the daily operations of workers. Thirdly, not causing safety accidents mainly depends on the control range of wind speed and cross-sectional size. The filter element is made of polytetrafluoroethylene coated microporous material, which has the characteristics of waterproofing, oil resistance, and high temperature resistance. At the same time, it can capture dust particles with a particle size of 0.1-0.5 microns, and has outstanding filtering performance. The cylindrical pleated design can achieve a filtration area of up to 10-13 square meters. Using high-precision specialized filter materials, the sub micron filtration efficiency is over 99%, ensuring standard emissions. The high-efficiency dust removal fan has strong suction, large air volume, low noise, high efficiency, and smooth operation. The filter bag is installed vertically, and the filtering surface is uniform. The machine is stopped to vibrate and clean the dust, avoiding secondary adsorption of dust. It is commonly used for collecting dry and high concentration dust. By using strong back blowing of compressed air, it can effectively shake off the dust attached to the filter cartridge in a short period of time. The high-efficiency dust removal fan has strong suction, large air volume, low noise, high efficiency, and smooth operation. The filter bag is installed vertically, the filtering surface is uniform, and the machine is stopped to shake and clean the dust, avoiding secondary adsorption of dust. The external dimensions of the equipment are shown in the attached figure and size table. We can also design dust collectors that meet the user's requirements based on the site conditions, equipped with universal brakes and traceless wheels, making the equipment stable and easy to move, while also providing anti vibration effects. Suitable for dust removal, recycling, and supporting use in industries such as hardware, machinery, automotive, aviation, electronics, food, chemical, and pharmaceutical. Can more effectively collect ultrafine powders such as ceramic powder, spray powder, toner cartridge powder, metal powder, etc

AfterSalesService :

• Dust collector