Bag dust collector, metal sanding machine, polishing dust collector, 4000 air volume dust collector

Description :

　　The filter bag is installed upright, with a uniform filtering surface. Stop the machine and shake to clean the dust, avoiding secondary adsorption of dust. The basic structure consists of four parts: the box, the fan, the filter bag, and the dust collector. The dusty gas is sucked into the box through the air inlet (vacuum hood) by the fan, filtered by the filter bag, and the dust particles are blocked on the surface of the filter bag. The purified gas after filtration is discharged through the air outlet from aerospace industries such as pharmaceuticals, casting, and technology electronics. It is suitable for absorbing large amounts of industrial dust and liquids, with strong suction power, and is an ideal industrial equipment for cleaning large mechanical processing workshops and factory floors. The optional HEPA high-efficiency filter can achieve a filtration effect of over 99.9%. The dust diameter can reach 0.3um, and a cyclone structure is added to the filter barrel to maintain long-lasting ultra-high dust collection efficiency. It is an ideal model for cleaning small dust such as metal dust and plastic dust. Compared to heavier sand and dust, such as lathes, grinders, milling machines, grinders, polishers, etc., and medium density dust, such as cement, ceramic powder, gypsum powder, asbestos powder, charcoal powder, pigments, glued laminated wood powder, plastic powder, etc. As well as non fibrous dust with a lower specific gravity, it has a good dust removal effect. Clean the debris and various suction accessories in the bucket in a timely manner. Clean the dust grid and bag after each operation, check for perforations or air leaks, and thoroughly clean the dust grid and bag with cleaning agent and heated water, and blow dry them. It is strictly prohibited to use non dry dust grids and bags

AfterSalesService :

• Dust collector