Bell valve BR-10J precision small AC380V electric actuator

Description :

　　IIIJiangsu Bell BR-10J Precision Small AC380VElectric actuatorThe advantages are as follows:

　　1. The shell is small and smooth, with a small volume, light weight, and simple wiring, making it beautiful, easy to move, and maintain.

　　2. There are various types available, including regular type, potentiometer type, passive type, intelligent type, fast and slow closing, indicator display, etc.

　　3. Low power loss rate can significantly save costs.

　　4. The electronic part is imported, and the mechanical part is finely processed with multiple protective devices to prevent damage caused by improper operation or overload. The manual electric device can be manually controlled at any time, and the compact structural optimization design eliminates the shortcomings of high working noise.

　　5. The intelligent integrated device has signal 4-20mADC input and output that can be controlled by computer PLC and DCS systems, proportional adjustment control and positioning, without the need for manual control. It can be position self-locking, simple wiring, safe and reliable, with high control accuracy and fast response speed.

　　6. It is very convenient to install on valves, and can be directly installed on manual valves without mechanical processing.

　　7. There are various power sources available, including AC220V, DC220V, DC24, AC110V, etc

　　Jiangsu Bell BR-10J precision small AC380V electric actuatorSecurity check:

　　1. Before connecting the power supply to the electric actuator, please confirm that the power supply voltage is consistent with the power supply voltage indicated on the nameplate of the electric actuator.

　　2. The pipeline of the electric actuator must be cleaned and blown clean. If there are impurities in the medium, a filter valve should be installed on the pipeline in front of the valve;

　　3. The power wiring of the electric actuator should have sufficient capacity to meet the requirements of the rated current and starting current of the electric actuator. Otherwise, it may cause the wiring to burn out and cause accidents.

　　4. During installation, the space required for maintenance and disassembly of each component should be ensured;

　　5. Check whether the model and parameters of the electric actuator meet the on-site installation requirements and technical requirements;

　　6. During installation, disassembly, and debugging, the sealing surface, sealing components, and explosion-proof surface of explosion-proof electrical equipment should not be damaged, and anti rust oil should be applied to the explosion-proof surface. The electrical cover should be tightly fastened to prevent rainwater or moisture from entering;

　　6. When the electric actuator is not frequently used, it should be regularly inspected, maintained, and operated. It is recommended to operate it at least once a month for no more than 10 minutes.

AfterSalesService :

• Electric actuator