Liquid oxygen storage tank in medical centralized oxygen supply CFW20-0.8 price

Description :

　　In the process of modern hospital construction, medical center oxygen supply equipment is an essential sub project. Centralized oxygen supply will inevitably require a station building. Currently, in some places where gaseous oxygen is relatively expensive, liquid oxygen is very commonly used. Especially for some larger hospitals with a total of over 300 beds,liquid oxygen storage tankIt is a relatively economical choice.

　　As we all know, the temperature of liquid oxygen is very low, and the liquid oxygen storage tanks used are strictly supervised and inspected by regulatory authorities. During installation and use, relevant regulations and standards must also be strictly followed. In order to prevent accidents before they occur and adhere to the principle of safety, Zhongjie Company, based on its years of construction experience, shares with you several points that need special attention during the installation of low-temperature liquid oxygen tanks for central oxygen supply, hoping to be helpful to everyone.

　　Firstly, before installation, the foundation of the low-temperature liquid oxygen storage tank should be solid and reliable, strictly in accordance with the design requirements. When fixing, anchor bolts must be used, and welding fixation is strictly prohibited; The inclination of the vertical tank should be less than 0.1%.

　　Secondly, low-temperature sealing gaskets, copper or austenitic stainless steel connecting bolts should be used for flange connections between low-temperature liquid oxygen storage tanks, vaporizers, and pressure reducing devices and pipelines. They should be pre tightened at room temperature and then tightened at low temperatures.

　　Thirdly, all wires and cables within a 7-meter radius of the low-temperature liquid oxygen storage tank should be equipped with metal sleeves and should not be exposed. The tank should be no less than 15 meters away from public gathering places and life support areas, no less than 10 meters away from walls or protruding parts of first and second level buildings, and no less than 30 meters away from coal-fired boiler rooms.

　　Fourthly, before adding liquid oxygen, it is necessary to ensure that nitrogen has been purged and medical liquid oxygen has been used for replacement and pre cooling. After the initial filling is completed, the pressure of the liquid oxygen storage tank should be slowly increased and monitored for changes in tank pressure within 48 hours.

AfterSalesService :

• Liquid oxygen storage tanks for centralized oxygen supply in medical settings