Garbage incineration treatment equipment Nanchong garbage incinerator equipment

Description :

　　Shandong Keshenghe Environmental Protection Technology Co., Ltd. is located in Zhucheng, a county in China. We are a company that integrates independent research and development, manufacturing, and technical services, producing environmental protection equipment and engineering general contracting. Zhucheng is an emerging industrial city and a coastal open city approved by the state on the Shandong Peninsula. The splendid ancient civilization and rapid economic development have formed a vibrant modern urban new style on this beautiful and rich land. It is adjacent to the coastal city of Qingdao to the east and the port city of Rizhao to the south, with convenient water, road, and air transportation.

　　In order to fully decompose waste and combustion products, it is necessary to strengthen the sufficient contact and mixing between air and waste, air and flue gas, expand the contact area, and enable harmful substances to oxidize and decompose in a short period of time at high temperatures. The incinerator has a unique air supply system and sufficient air pressure to enhance the mixing degree between the system and waste and flue gas.

　　In order to solve the problems of sexual smoke and carbon black pollution, the first measure taken was to increase the incineration temperature to 700 ℃, and later further increase it to 800-1100 ℃. At that time, people were already aware of the impact of combustion air volume and input method on flue gas temperature, so measures such as raising chimneys, configuring air supply fans and induced draft fans were successively adopted to increase ventilation and meet the demand for combustion air volume in the incineration process. After the chimney is raised, it also solves the problem of the diffusion of neutral and harmful substances in the flue gas.

　　Garbage enters the inclined downward grate through the feeding hopper (the grate is divided into a drying zone, a combustion zone, and a burnout zone). Due to the staggered movement between the grates, the garbage is pushed downward, allowing it to pass through various areas on the grate in sequence (when garbage enters another area from one area, it plays a major turning role). By using a fan to extract the foul odor generated by the fermentation and accumulation of garbage in the upper part of the garbage storage pit, it is then heated by a steam (air) preheater and sent into the incinerator as combustion air to ensure that the garbage is dried in a short period of time. Combustion air enters from the lower part of the grate and mixes with garbage; High temperature flue gas generates hot steam through the heating surface of the boiler, and the flue gas is also cooled. After being treated by the flue gas treatment device, the flue gas is discharged.

　　The furnace body is a cavity built on the upper part of the grate with refractory materials, insulation materials, and thermal insulation materials, wrapped in steel plates to prevent smoke leakage and keep the surface temperature of the furnace body below 50 ℃. There is a maintenance door on the side of the furnace body, and the ignition burner is also located on the side. The furnace body is equipped with an operating console.

　　The flue gas in the furnace flushes the material from bottom to top, drying the moisture in the material and igniting it in a timely manner. In addition, the front and rear arch refractory materials store heat and radiate the material, thereby ensuring the combustion temperature of the material. Extended the residence time of flue gas, completely burned the organic matter in materials and fly ash, and improved the destruction rate of harmful substances.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Garbage incineration treatment equipment