Price of waste incineration equipment for Nanchong garbage incinerator

Description :

　　Kesheng and its employees share the vitality and pioneering spirit of an emerging city like Zhucheng, while also having rich experience in sewage treatment. The company has complete technical processing equipment and non-standard design, manufacturing, and service capabilities for environmental protection equipment.

　　However, mechanical grate incinerators have the phenomenon of high initial investment, operation, and maintenance costs, and the wear and corrosion of grate plates are relatively serious. Therefore, in the process of selecting garbage disposal technology, it is necessary to conduct a systematic analysis of the advantages and disadvantages of the technology to ensure the safety and effectiveness of garbage disposal.

　　The furnace body is a cavity built on the upper part of the grate with refractory materials, insulation materials, and thermal insulation materials, wrapped in steel plates to prevent smoke leakage and keep the surface temperature of the furnace body below 50 ℃. There is a maintenance door on the side of the furnace body, and the ignition burner is also located on the side. The furnace body is equipped with an operating console.

　　The flue gas in the furnace flushes the material from bottom to top, drying the moisture in the material and igniting it in a timely manner. In addition, the front and rear arch refractory materials store heat and radiate the material, thereby ensuring the combustion temperature of the material. Extended the residence time of flue gas, completely burned the organic matter in materials and fly ash, and improved the destruction rate of harmful substances.

　　Garbage enters the inclined downward grate through the feeding hopper (the grate is divided into a drying zone, a combustion zone, and a burnout zone). Due to the staggered movement between the grates, the garbage is pushed downward, allowing it to pass through various areas on the grate in sequence (when garbage enters another area from one area, it plays a major turning role). By using a fan to extract the foul odor generated by the fermentation and accumulation of garbage in the upper part of the garbage storage pit, it is then heated by a steam (air) preheater and sent into the incinerator as combustion air to ensure that the garbage is dried in a short period of time. Combustion air enters from the lower part of the grate and mixes with garbage; High temperature flue gas generates hot steam through the heating surface of the boiler, and the flue gas is also cooled. After being treated by the flue gas treatment device, the flue gas is discharged.

　　The furnace body is lined with high-temperature refractory materials, with insulation material in the middle and insulation material on the outer layer, which can reduce the heat loss of the furnace body and improve the incineration efficiency; Use steel plates as a protective layer on the exterior to prevent air leakage; The refractory material used is a type of refractory material developed jointly by our company and the Building Materials Science Research Institute, which is resistant to acid smoke corrosion, high temperature, and high strength.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Waste incineration equipment