Belt dewatering machine for processing machinery, Zhongshan tailings slurry belt dewatering machine

Description :

　　Kesheng and its employees share the vitality and pioneering spirit of an emerging city like Zhucheng, while also having rich experience in sewage treatment. The company has complete technical processing equipment and non-standard design, manufacturing, and service capabilities for environmental protection equipment.

　　There are various structural forms of horizontal vibrating centrifuges. Overall, it can be divided into buffer system, transmission system, lubrication system, and body components.

　　In mining centrifuges, vibration discharge centrifugal dewatering machine and scraper discharge centrifugal dewatering machine are two common centrifugal equipment. Their work purpose is to remove the moisture on the coal surface through centrifugal force, and then use different methods to discharge the dehydrated material into the discharge port.

　　The belt dewatering machine body contains many components, among which the important components are the central shaft and hollow shaft in the middle of the body. It is the key to achieving simultaneous operation of the sieve basket and scraper. And different ratios of pulley (or gear) diameters are the key to achieving different speeds between the sieve and scraper.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end in the direction of rotation of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　As long as you choose Keshenghe, you will definitely be infected by the corporate spirit of "honest management, unity and pragmatism, pioneering innovation, and striving to be the first" of Keshenghe employees, and also feel the sincerity of Keshenghe people.

AfterSalesService :

• Belt dewatering machine processing machinery