Coal mine mud belt dewatering machine Quanzhou belt dewatering machine processing machinery

Description :

　　Shandong Keshenghe Environmental Protection Technology Co., Ltd. is located in Zhucheng, one of the top 100 counties in China. We are a high-tech enterprise that integrates independent research and development, manufacturing, and technical services, producing environmental protection equipment and engineering general contracting. Zhucheng is an emerging industrial city and a coastal open city approved by the state on the Shandong Peninsula. The splendid ancient civilization and rapid economic development have formed a vibrant modern urban new style on this beautiful and rich land. It is adjacent to the coastal city of Qingdao to the east and the port city of Rizhao to the south, with convenient water, road, and air transportation.

　　In the design of coal preparation plants, the use of mining centrifuges can achieve automation of feeding and discharging, which is beneficial for achieving automatic control of the entire coal preparation plant.

　　The working principle of a horizontal vibrating centrifuge is summarized as follows: on one hand, dehydrate through the centrifuge; One side moves through the inertial force of vibration.

　　Each machine has corresponding material parameter requirements. There are specific requirements for processing capacity, block size of materials, moisture content of materials before dehydration, and dehydration rate after dehydration. After meeting the feeding parameters, the gap between the sieve blue and the scraper has a significant impact on the operation of the centrifuge. The small gap reduces the amount of coal laid on the blue wall of the sieve, reduces friction, facilitates material flow, and to some extent reduces the blockage of the sieve basket. The moisture in the material can easily pass through the material layer, which is beneficial for dehydration. The gap will cause an increase in coal volume on the blue screen wall, which increases the resistance to movement and is not conducive to dehydration. For centrifugal machines with spiral scraper discharge, the clearance requirement is generally around 2mm. By adjusting the relative position between the scraper and the sieve basket, the size of this gap can be fine tuned. The direction of the spiral blade on the scraper is designed based on the relative rotation position between the scraper and the sieve blue. It causes the material to advance towards the discharge end in the direction of rotation of the scraper spiral plate. Therefore, the direction of rotation of the motor cannot be changed arbitrarily, and it must be powered according to the design rotation direction requirements.

　　Dehydrators generally refer to centrifugal dehydrators used in coal mines in the field. Vibration centrifugal dehydrators and scraper discharge centrifugal dehydrators are two commonly used centrifugal dehydrators in coal mines.

　　Kesheng and Environmental Protection Technology look forward to creating a green and warm home together with new and old friends. Looking forward to working with you!

AfterSalesService :

• Coal mine mud belt dewatering machine