Orchard hand-held tractor harvester rotary tiller electric starter hand-held ridge machine price

Description :

　　Hand guided tractors typically range from 8-22 horsepower. The standard equipment for a walking tractor is a rotary tiller. You can choose specialized hand guided trenching machines, sowing and fertilizing machines, weeding wheels, trailers, etc. to meet your needs. One machine for multiple uses is a very reliable multifunctional hand guided tractor.

　　The construction process of the walking tractor: adopting a rotary tillage rear design, reinforced chassis with casting, and branded engine. The combination of the three in one is more conducive to the service life of small hand-held rotary tillers. And the quality is also very stable. A machine usually occupies 2-3 acres of land, and beginners usually occupy 1.5-2 acres per hour.

　　1. At the beginning of the task, the rotary tiller should be in a raised state. First, the power output shaft should be combined to increase the speed of the blade shaft to the rated speed, and then the rotary tiller should be lowered to gradually insert the blades into the soil to the desired depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade enters the soil, in order to avoid bending or breaking the blade and increasing the load on the tractor.

　　2. In homework, it is advisable to travel at a low speed as much as possible, which can ensure the quality of the work, make the soil chunks finer, and reduce the wear and tear of the machinery. Pay attention to whether there is any noise or metal tapping sound from the rotary tiller, and observe the situation of broken soil and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection. Only after troubleshooting can the operation continue.

　　When turning on the ground, it is prohibited to work. The rotary tiller should be lifted to lift the blades off the ground and the tractor throttle should be reduced to avoid damaging the blades.

　　When reversing, crossing embankments, and transferring land parcels, the rotary tiller should be lifted to its position and the power should be cut off to avoid damaging the machinery.

　　5. After each shift, the rotary tiller should be maintained. Remove soil and weeds from the blade, check the fastening of all connecting components, and add lubricating oil to each lubrication point to prevent further wear and tear.

AfterSalesService :

• walking tractor