Xinjiaqiang concrete mixer 350 mixer manufacturer

Description :

　　Fertilizer mixing equipment Organic fertilizer mixer Horizontal mixing mixer single double axis premixed mixing Organic fertilizer mixing equipment Biological fertilizer mixer Organic fertilizer double shaft mixer

　　Horizontal mixing mixerIntroduction：

　　The horizontal mixing machine is a new type of mixing equipment in our company, consisting of transmission components, double-layer spiral stirrer, and U-shaped barrel body. The circular material trough is equipped with reverse "S" - shaped blades. The main shaft is driven by a reducer and continuously rotated by a motor through the "S" - shaped blades. Due to the gravity and particle size of the material, the blades are slanted and rotated to quickly mix the material evenly. High mixing uniformity and low residue, suitable for mixing compound feed, concentrated feed, and additive premix.

　　The horizontal mixer adopts a novel rotor structure, and the gap between the rotor and the bright body can be adjusted to near zero, effectively reducing the amount of material residue; It can crush larger materials, with a more reasonable overall structure, beautiful appearance, and convenient operation and maintenance.

　　Horizontal mixing mixerstructure：

　　one.rack partAll working bodies of the machine are installed and fixed on the frame, which is welded with high-quality carbon steel plates and channel steel, and has passed strict product qualification certification and specific process requirements, achieving the purpose of using this machine;

　　two.Transmission connection part:The electric motor drives the belt pulley, V-belt, and reducer to rotate the main shaft. The transmission reducer and the working part of the main engine both use nylon column pins as transmission connectors and transmission drivers, which facilitate assembly and maintenance;

　　three.Mixing and stirring section:It is transmitted from the transmission wheel to the main shaft through the column pin coupling. The special spiral stirring blades welded to the spindle rotate synchronously, flipping the material evenly in the mixing chamber, allowing the material to be thoroughly mixed and greatly reducing the residual amount of material. After a period of mixing, the materials flow out from the specially designed discharge port below the machine.

　　Horizontal mixing machinePrinciple:

　　The horizontal cylinder is equipped with twin axis rotating blades that rotate in opposite directions. The blades form a certain angle to circulate and stir the material along the axial and radial directions, allowing for rapid and uniform mixing of the material. The performance characteristics of the horizontal mixer are that the rotational speed of the shaft driven by the reducer and the structure of the propeller blades will weaken the gravity of the material. With the lack of gravity, the significant differences in particle size and specific gravity among the materials are ignored during the mixing process. The intense stirring motion shortens the mixing time, making it faster and more energy-efficient. Even if there are differences in the specific gravity and particle size of the materials, good mixing effects can still be achieved under the rapid and intense agitation and scattering of the staggered mixing blades. High uniformity of mixing, low residual content, suitable for mixing two or more fertilizers and pre mixed additives.

AfterSalesService :

• blender