Side flip mortar mixer manufacturer direct sales horizontal asphalt mixer horizontal

Description :

　　Mixing mixerPrinciple. When the work is mixed, the materials inside the machine are subjected to the action of two rotors in opposite directions, and undergo composite motion. The blade with animal materials rotates counterclockwise along the inner wall of the machine slot, while the blade with animal materials flips left and right. In the weight loss zone where the two rotors intersect and overlap, regardless of the shape, size, and density of the materials, they can float up in an instant weight loss state. This causes the materials to form a continuous cycle of flipping in all directions inside the machine slot, intersecting and shearing each other, thus achieving a fast, soft, and uniform mixing effect

　　Ceramic powder mixing mixerConfiguration introduction: The machine adopts a three-layer spiral belt mixing form inside. During the convection process, the three material streams penetrate and displace each other to mix, and the two sides roll and mix. There are no lumps or dead corners on the barrel wall, so that the materials can be quickly and uniformly mixed in a short time. Advantages of horizontal dry powder mixer: The parts in contact with the material are all made of stainless steel, which is easy to clean and corrosion-resistant. Equipped with a gear reducer, the machine has the characteristics of long service life and low working noise; Adopting a semi enclosed protective door design, it is easy to maintain and upkeep the equipment; Equipped with a time control system, the mixing time can be adjusted and set arbitrarily.

　　Ceramic powder mixing mixerMachine structure and characteristics:

　　1. The ZX series vertical mixer consists of a barrel body, barrel cover, feeding tube, main spindle core (propeller blade), feeding hopper, discharge outlet, circulation outlet or heating device, and automatic feeding device.

　　2. The barrel body is generally made of rolled stainless steel material, with a hard and smooth inner surface. It has the advantages of wear resistance, corrosion resistance, and easy cleaning. The conveying pipe is made of refined 3mm thick stainless steel pipe and has a reinforcement device, which is sturdy, durable, and not deformed; The main spindle core, also known as the spiral rod, is generally made of 89 * 6cm stainless steel seamless tube for machines weighing less than 10 tons, which is straightened by a 5-meter lathe and equipped with imported bearings. Under correct usage conditions, it can guarantee 5 years of no deformation.

　　3. The base is made of precision 16 centimeter steel plate and equipped with a grease nipple. Users should perform daily maintenance according to the maintenance requirements

AfterSalesService :

• mortar mixer