Processing custom tipping bucket mixer, cylindrical mud mixer, price

Description :

　　Mobile tipping bucket mixer, cylindrical mud mixer, vertical tipping bucket concrete mixer, belongs to the self falling double cone reverse discharge mobile concrete mixer, which can mix plastic and semi dry hard concrete. The mixing drum rotates forward for mixing and reverses for discharging. Each tank can mix 350 liters of concrete (referring to the volume of compacted concrete), and can produce 10-14 cubic meters per hour. Suitable for general construction sites, roads, bridge engineering, and small and medium-sized concrete component factories. When fixed mixing, a pit can be dug to make the hopper mouth level with the ground, making feeding convenient and greatly reducing labor intensity.

　　Precautions for concrete mixer:

　　1. The concrete mixer should be placed in a flat position, with square blocks used to support the front and rear axles, so that the tires can be placed on the ground to prevent movement during operation.

　　2. The concrete mixer should be equipped with secondary leakage protection. After the power is turned on before going to work, it must be carefully inspected. Only after passing the empty test run can it be used. During the trial operation, it is necessary to check whether the mixing drum speed is appropriate. Generally, the empty speed of the mixer is 2-3 revolutions faster than that of the mixer (after loading). If there is a significant difference, the ratio of the driving wheel to the transmission wheel should be adjusted.

　　3. The rotation direction of the mixing drum should conform to the direction indicated by the arrow. If it does not match the actual direction, the motor wiring should be corrected.

　　4. Check whether the transmission clutch and brake are flexible and reliable, whether the steel wire rope is damaged, whether the track pulley is in good condition, whether there are obstacles around, and the lubrication condition of each part.

　　5. After starting up, regularly pay attention to whether the various components of the concrete mixer are operating normally. When stopping, regularly check whether the blades of the concrete mixer are bent and whether the screws are loose or loose.

　　6. When the concrete mixing is completed or expected to stop for more than 1 hour, in addition to removing the remaining material, stones and clean water should be poured into the shaking drum, and the machine should be turned on to wash away the mortar stuck to the drum before discharging it completely. There should be no accumulated water inside the barrel to prevent rusting of the barrel and blades. At the same time, the accumulated dust outside the mixing drum should be cleaned to keep the machinery clean and intact.

　　7. After work and when not in use, the power should be turned off and the switch box should be locked to ensure safety.

AfterSalesService :

• blender