Diesel Hand held Tractor Hand held Tractor Harvester Electric Start Hand held Ridge Raising Machine

Description :

　　Small hand guided tractors typically range from 8-25 horsepower. The standard equipment for a walking tractor is a rotary tiller. You can choose specialized hand guided trenching machines, sowing and fertilizing machines, weeding wheels, trailers, etc. to meet your needs. One machine for multiple uses is a very reliable multifunctional hand guided tractor.

　　The construction technology of Shandong walking tractor: adopting the design of rotary tillage rear, reinforced chassis with casting, and Changzhou engine. The combination of the three in one is more conducive to the service life of small hand-held rotary tillers. And the quality is also very stable. A machine usually occupies 2-3 acres of land, and beginners usually occupy 1.5-2 acres per hour. Fuel efficient and durable, truly affordable and profitable for users

　　Hand support is a small tractor. A multi-purpose walking agricultural machinery mainly used for traction and transportation, composed of engine, chassis, electrical and other systems. The ability to move by hand is achieved through the power of the internal combustion engine, which is transmitted through the transmission system to obtain driving torque. The driving wheels then exert a small, backward horizontal force (tangential force) on the ground through the tire tread and tire surface. This reactive force is the driving force that propels the tractor forward (also known as feed pushing force). Simple structure, low power, suitable for small plots of farmland. Controlled by the driver holding onto the armrest to operate the mechanism, tow or drive supporting agricultural tools for hilly terrain mountainous area Rectification work on plain farmland.The brake handle and clutch handle of the walking tractor are made together. The clutch rocker arm and brake rocker arm are also integrated. When the handle is pulled from the engaged position to the disengaged position, the swing angle of the brake arm is small and cannot exert braking effect. Continuing to pull the handle backwards increases the swing angle of the brake swing arm, and the brake begins to work, causing the tractor to stop. If towing, you also need to apply the trailer brake at the same time. After the tractor comes to a complete stop, release the brake. To prevent the clutch spring from aging, place the clutch handle in the "engaged" position and let the diesel engine idle at low speed for a few minutes, gradually reducing the water temperature and oil temperature of all wheels. Then close the throttle and turn off the engine. Attention, do not forcefully press the accelerator pedal before turning off the engine. After turning off the engine, turn off the fuel tank switch. Rotate the flywheel to place the piston at top dead center. It can better protect the machine.

　　Rotary tiller: used for rotary tillage

　　Weeding wheel: used for weeding

　　Spray pump: used for spraying medicine

　　Ridge support device: used for raising large ridges

　　Trench plow: used for digging ditches

AfterSalesService :

• walking tractor