Tractor Harvester Electromechanical Startup Hand held Ridge Lifting Machine Multi functional Hand held Tractor

Description :

　　Small hand guided tractor, mountain rotary tillage and soil preparation machine, fertilization and hand guided trenching machine

　　The hand-held rotary tiller is designed for hills, mountainous areas, small plots of land with large height differences, and no tillage channels. Suitable for loosening soil, tillage, and weeding in sandy soil and economic planting. Widely applicable for field cultivation, trenching and ridge building, management of plastic greenhouses, nurseries, orchards, vegetable gardens, tea planting operations, etc. It has the advantages of light weight, small size, simple structure, easy operation, easy maintenance, and low fuel consumption. High production efficiency can loosen the hard soil under fruit trees, making it easier to fertilize and replacing traditional laborious farming methods.

　　A walking tractor is a multi-purpose walking machinery mainly used for traction and transportation, consisting of an engine, chassis, electrical and other systems. The walking tractor can travel by relying on the power of the internal combustion engine through the transmission system, obtaining driving torque from the driving wheels, and then applying a small, backward horizontal force (tangential force) to the ground through the tire tread and tire surface. This reaction force is the driving force that drives the tractor forward (also known as feed pushing force). Simple structure, low power, suitable for small plots of farmland. The driver controls the operating mechanism, pulls or drives the supporting agricultural tools by holding onto the armrest for operation

　　1. At the beginning of the task, the rotary tiller should be in a raised state. First, the power output shaft should be combined to increase the speed of the blade shaft to the rated speed, and then the rotary tiller should be lowered to gradually insert the blades into the soil to the desired depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade enters the soil, in order to avoid bending or breaking the blade and increasing the load on the tractor.

　　2. In homework, it is advisable to travel at a low speed as much as possible, which can ensure the quality of the work, make the soil chunks finer, and reduce the wear and tear of the machinery. Pay attention to whether there is any noise or metal tapping sound from the rotary tiller, and observe the situation of broken soil and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection. Only after troubleshooting can the operation continue.

　　When turning on the ground, it is prohibited to work. The rotary tiller should be lifted to lift the blades off the ground and the tractor throttle should be reduced to avoid damaging the blades.

　　When reversing, crossing embankments, and transferring land parcels, the rotary tiller should be lifted to its position and the power should be cut off to avoid damaging the machinery.

　　5. After each shift, the rotary tiller should be maintained. Remove soil and weeds from the blade, check the fastening of all connecting components, and add lubricating oil to each lubrication point to prevent further wear and tear.

　　Weeding wheel: used for weeding and spraying. Pump: used for spraying

　　Ridge support device: used for raising large ridges and trenching plow: used for trenching

　　Rotary tillage wheel: used for rotary tillage, loosening soil, and trenching. Knife: used for trenching and fertilizing

　　Backfilling wheel: used for burying trenches, filling soil, sowing, and fertilizing baskets: used for fertilizing, while automatically opening small trenches in front for sowing at the same time.

AfterSalesService :

• tractor