Hongyi BQF15-16 Pneumatic Submersible Pump is Convenient to Use for Mining Pneumatic Sewage Submersible Pump

Description :

　　BQF15-16Pneumatic submersible pump, mining pneumatic sewage submersible pump, mining pneumatic pump

　　Customer requestBQF15-16 Pneumatic Submersible PumpIt's our service standard,BQF15-16 Pneumatic Submersible PumpValue contracts and ensure quality. It's difficult to win a customer and easy to lose one, so we takeMining pneumatic submersible sewage pumpGood job, long-term cooperation.

　　BQF15-16Pneumatic submersible pumpThis type of pneumatic submersible pump, based on the actual needs of domestic mining site construction, draws on the advantages of advanced foreign products of the same type and adopts a series of advanced processes, making it small in size, light in weight, novel in structure, easy to operate, easy to install, maintain and move. Drainage operations in places with different environmental conditions, such as mining development, excavation of tunnels or vertical shaft construction. The pump adopts a blade type pneumatic motor in the power part, with an automatic centrifugal speed regulator structure, which can ensure operation within the rated speed range. It is an ideal drainage tool for high lift mining well excavation and construction

　　BQF15-16Pneumatic submersible pumpTechnical Specifications:

　　Main technical indicators:

　　Lift: 16 meters

　　Flow rate: 15m3/min

　　Rated speed: 3000/min

　　Air pressure: 4-5kg/㎡

　　Load gas consumption: 1.5m3/min

　　Inner diameter of intake pipe: 25mm

　　Exhaust cross-section: 18- Φ 6mm hole

　　Total weight: 16kg

　　Dimensions (length * width * height) 230 * 200 * 350mm

　　BQF15-16Pneumatic submersible pumpProduct Features

　　The mechanical seal adopts a new type of hard and corrosion-resistant titanium tungsten material, which can ensure the safe and continuous operation of the sewage pump for more than 8000 hours.

　　2. The non clogging submersible sewage pump adopts a unique single or double blade impeller structure, which greatly improves the ability to detect the passage of pollutants. It can effectively pass through fiber materials with a diameter of 5 times the pump diameter and solid fruit materials with a diameter of about 50% of the pump diameter.

　　3BQF15-16 Pneumatic Submersible PumpThe overall structure is compact, the volume is small, the noise is low, the energy-saving effect is significant, the maintenance is convenient, and there is no need to build a sewage pump room. It can work underwater, greatly reducing the project cost.

　　4. The float switch can automatically control the start and stop of the sewage pump according to the required liquid level changes, without the need for special supervision, making it extremely convenient to use.

　　5. It can be used within the full head without overloading the motor.

　　6. A high-precision anti-interference water leakage detection sensor is installed in the sealed oil chamber of the sewage pump, and a thermal sensor is embedded in the stator winding to automatically protect the water pump motor.

　　7BQF15-16 Pneumatic Submersible PumpA dual rail automatic coupling installation system can be equipped according to user needs, which brings great convenience to installation and maintenance, and people do not have to enter the sewage pit for this.

　　8. A fully automatic control cabinet can be equipped according to user needs to automatically protect the pump from water leakage, leakage overload, and overheating, improving the safety and reliability of the product.

　　BQF15-16Pneumatic submersible pumpInstallation Warning

　　1. If a fault is found, the machine should be stopped and repaired before use.

　　2. When installing the intake duct type, blow away impurities inside the duct and at the joints to ensure that the intake air is clean and dry, in order to prevent impurities from entering the pump body, causing component wear or rotor jamming and preventing rotation.

　　3. When there is no water, immediately turn off the gas source and stop the machine!

　　4. Both users and our company are not allowed to arbitrarily change the configuration of safety standard accessories and other accessories.

　　5. The exhaust duct should be exposed above the water surface and should not allow water or other impurities to enter. The internal components of the motor of Party B may rust or cause the blades and rotors to get stuck.

　　6. The air pressure shall not exceed 0.7MPa.

　　7BQF15-16 Pneumatic Submersible PumpBefore installing and using this product, it is necessary to read the product manual thoroughly and strictly follow the provisions of this manual for installation and operation.

　　8. The speed of the air pump is high (the bearings are cooled by water), and the no-load operation time without water cannot exceed 3 minutes! To avoid damage to the components and prevent malfunctions from occurring.

AfterSalesService :

• Pneumatic submersible pump