Aseptic liquid nitrogen filling machine

Description :

　　Introduction to Chengdu Zhuoda Yuntong Liquid Nitrogen Filling Supporting System

　　To ensure the normal 24-hour operation of the nitrogen drip machine in the beverage production process, it is necessary to use a Zhuoda Yuntong self pressurized liquid nitrogen tank for continuous nitrogen replenishment. Below are the reasons for this:

　　Have you noticed a strange phenomenon where unopened beverage bottles are hard and not easy to collapse? Why do they collapse when opened without drinking? This is because in the beverage production process, a nitrogen dropper is used to drop one drop into the beverage bottle, and the beverage bottle is immediately sealed mechanically. The liquid nitrogen evaporates immediately, and the PP bottle is supported by an increased gas, which is very tangible and convenient for transportation. The liquid nitrogen needs to be tested in moderation. If there is too much, the seal is not tight, and if there is too little, it is easy to collapse!

　　Precautions for supplementing nitrogen to the drip machine in the self pressurized liquid nitrogen tank of Zhuoda Yuntong:

　　1. Beverage production and processing personnel can set their own, adding individually or continuously-Speed of changing refueling mode

　　2. Utilizing spinning vacuum technology, liquid nitrogen maintains a constant temperature and is not easily evaporated

　　3. Use soft filling compatibility mode - suitable for hot filling, powder, and granular products

　　4. Utilize micro injection technology-Can maintain consistency and accuracy of nitrogen injection at all production line speeds

　　5 Nitrogen Positive Pressure Protection-The nozzle adopts dry nitrogen positive pressure protection to prevent external air from entering and causing frost and ice blockage inside the nozzle;

　　6. Adopt differential pressure level gauge-Equipped with high liquid level accuracy, the tank has gas-liquid separation function, achieving pressure free filling;

　　7. Accurate nitrogen injection-Provide stable and accurate nitrogen injection, proficient in operation

　　8. Individual refueling-Up to every minuteeight hundredContainer, choose the mode by yourself

　　Technical parameters of self pressurized liquid nitrogen tank for Zhuoda Yuntong nitrogen dripping machine (taking 200L as an example):

　　onegeometric volume220L

　　twoeffective volume200L

　　threeStatic daily evaporation rate of liquid nitrogen 1%

　　fourinfusion volume≥10L/min

　　fiveOuter diameter of tank body656mm

　　sixheight1300mm

　　sevenempty weight125kg

　　eightStandard work pressure:0.05Mpa

　　nineMaximum pressure：0.09Mpa

　　tenPrimary safety valve opening pressure0.099Mpa

　　elevenSecondary safety valve opening pressure0.15Mpa

　　Advantages of using self pressurized liquid nitrogen tanks for Zhuoda Yuntong nitrogen dispensers:

　　1. Ensure the firmness of the bottle - maintain the original shape of the lightweight bottle

　　2. Reducing oxygen usage - The energy-saving performance of liquid nitrogen injection can be measured and replicated

　　3. Effectively reduce flat beverage bottles - increase bottle pressure to eliminate the problem of flat bottles

　　4. Reduce the amount of waste bottles, increase economic benefits, effectively utilize warehouses - improve product stacking capacity, reduce usage area

　　5. Be thin yet firm,PETBottle lightweighting — alleviatePETWeight saving, cost saving and environmental protection

　　6. Extend the shelf life — Decrease in oxygen content to a lower level

　　7. Replace glass bottles with plastic packaging instead of glass — Eliminate the personal hazards and weight of using glass bottles

　　8. Labels are easy to stick — Consistent bottle wall hardness improves high labeling efficiency

　　The self pressurized liquid nitrogen tanks produced by our company are all made of stainless steel. By opening the high-pressure valve, a small amount of liquid gas stored in the container is vaporized. The vaporized volume is large, and a certain weak pressure is generated inside the container. After opening the discharge valve, the liquid gas in the container is automatically discharged under pressure, which is safe, convenient and fast for filling other containers or equipment with liquid gas.

AfterSalesService :

• PET bottle liquid nitrogen filling function