Fruit crushing large-scale juicer, commercial juicer, industrial stainless steel beater

Description :

Spiral juicer is a continuous operation equipment used for extruding liquids from organic materials and separating slag from inorganic materials. The equipment has high strength, high bearing pressure, no deformation, easy blockage, corrosion resistance, wear resistance, no slipping, low failure rate, easy maintenance, long service life, and extremely high juice and dehydration rates. This model is widely used for juice extraction in the vegetable and fruit industry, as well as solid-liquid separation of materials in industries such as brewing, chemical, pharmaceutical, and environmental protection. This model can be used alone or in conjunction with production lines.

　　Purpose and Scope of Application

　　★ Used for pressing fruits such as pineapple, apple, pear, etc;

　　★ Used for pressing mulberries, grapes, oranges, oranges and other berries;

　　★ Used for pressing vegetables such as tomatoes, ginger, garlic, celery, etc.

　　★ Spiral propulsion extrusion;

　　★ Fully automatic completion of berry, nut, and vegetable juice extraction and slag removal processes;

　　Equipment structure and working principle

　　1. Structure:

　　It consists of front support, feeding hopper, crusher, screw, filter screen, juice container, rear support, slag discharge groove and other parts. The left end of the screw spindle is supported in the rolling bearing seat, and the right end is supported in the handwheel bearing seat. The electric motor drives the screw to work through a pair of triangular belt pulleys.

　　2. Working principle:

　　The main component of this equipment is the spiral, which gradually increases in diameter along the direction of the slag outlet and decreases in pitch. When the material is pushed forward by the spiral, the volume of the spiral cavity shrinks, forming a squeezing effect on the material. The rotation direction of the spiral spindle is clockwise when viewed from the feeding hopper towards the slag hopper. The raw materials are added to the feeding hopper and are compressed under the push of the screw. The squeezed juice flows into the bottom juice container through the filter screen, while the waste is discharged through the annular gap formed between the screw and the conical part of the pressure regulating head. The size of the gap can be adjusted by moving the pressure regulating head along the axial direction. Used to adjust the resistance of slag discharge by changing the size of the gap clockwise (when the pressure regulating head is turned to the left to reduce the gap, and vice versa when the handwheel shaft is seated when viewed from the slag discharge groove of the equipment towards the feeding hopper end). The slag yield can be changed, but if the gap is too small, under strong squeezing, some of the slag particles will be squeezed out through the filter screen together with the juice. Although the juice output increases, the quality of the juice relatively decreases, and the size of the gap should be determined according to the specific process requirements of the user. The stainless steel spiral fruit and vegetable juicer is suitable for pulping and separating various fresh fruits and vegetables. Products such as orange flesh, grapes, macaques, mulberries, bayberries, and peaches (without seeds) can be processed into fruit sauce by separating the seeds, skins, and kernels. It can also be used to separate vegetables such as cut tomatoes, chili peppers, and celery into vegetable pulp and separate the vegetable tendons. It is an ideal machine for making jam, fruit juice, and vegetable juice, and is an important equipment for food processing enterprises.

　　The electric motor drives the main shaft to rotate through a pair of pulleys. The tripod is mounted on the main shaft, the beating plate is mounted on the tripod, and the sieve, funnel, and slag are mounted on the lower bracket. On the loading bracket of the upper inner cylinder and feeding hopper, the entire upper bracket is connected by hinges, which can be opened to check the quality of the fruit pulp.

　　The part in contact with the material is made of national standard 304 stainless steel.

　　The rack material can be selected from the national standard 304 stainless steel, depending on customer requirements.

AfterSalesService :

• Large juicer