IBC ton barrel filling machine chemical large barrel filling machine manufacturer CAS Kaishi liquid automatic filling machine production line

Description :

　　CBM-IBC-1000KG IBC ton barrel filling machine Chemical large barrel filling machine manufacturer CAS Kaishi liquid automatic filling machine How much does it cost to produce 200l filling machine equipment

　　CAS Shanghai Kaishi Company Filling Machine Selection Cognition:

　　1. Single barrel filling (200L barrel single barrel filling)

　　2. 4-barrel filling (200L barrel, 4-piece barrel filling)

　　3. Ton bucket filling (IBC ton bucket)

　　4. Multiple filling heads (configured when multiple product types and nozzles cannot be mixed)

　　5. Filling under liquid level (configured when foam will be generated when materials flow)

　　6. Explosion proof requirements (ordering, intrinsic safety, explosion-proof)

　　CAS Kaishi IBC bucket filling machine manufacturer Suitable for continuous filling of four open barrels, with a single weighing of 200 and a large weighing of 2000kg for four barrels

　　·Barrel conveying, automatic identification of barrel mouth, automatic filling, automatic conveying, barrel discharge, filling PLC control, micro switch positioning, continuous automatic completion

　　CBM-IBC-1000KG IBC Tonne Barrel Filling Machine Chemical Large Barrel Filling Machine Manufacturer CAS Kaishi Liquid Automatic Filling Machine Production How much does it cost

　　Scope of use:

　　·IBC drums of 30L, 60L, 200L, and 1000kg are particularly suitable for liquid filling in the chemical industry, including coatings, paints, inks, adhesives, curing agents, organic solvents, daily chemicals, detergents, pesticides, pharmaceuticals, lubricants, edible oils, and various flowable liquids..

　　·Explosion proof mark: EXD Ⅱ BT4 Applicable fields:

　　Measurement range ≤ 2000kg, barrel size ≤ φ 600 x h930

　　Division value 0.2kg power supply AC380V ± 10% 50HZ

　　Filling accuracy ≤± 0.4kg, air source 0.5Mpa

　　Filling speed 40-60 barrels per hour

　　Scale size (length × width) 1500 × 1500 (mm)

　　Filling station 4 roller conveyor length 4.5m, 7.5m

　　How much does it cost to produce CFM IBC ton barrel filling machine, chemical large barrel filling machine manufacturer, CAS Kaishi liquid automatic filling machine

　　1、 Product models: CAS-CFM-50/200L, CAS-CFM-1000L

　　2、 Product Introduction:

　　The CAS-CFM-IBC rocker arm bucket filling machine adopts a liquid level up (down) filling method and is suitable for filling various liquid materials. The filling head device designed for * is easy to operate, with fast filling; And ensure to a limited extent the dripping of residual liquid after infusion is completed. When operating, the operator only needs to simply shake the filling head rocker arm to align with the top of the barrel mouth, press the [Start] button on the handle, and the filling head will automatically insert into the barrel and automatically peel the empty barrel. Then open the filling valve and perform dual speed filling on the ground; After filling is completed, the filling head is automatically lifted outside the barrel, and the drip tray is automatically connected to the bottom of the filling head. Shake the filling head again to fill the 2nd, 3rd, and 4th barrels one by one. After filling, use a forklift or hydraulic truck to remove the pallet from the weighing platform.

　　CAS Kaishi's products have a wide range of applications - used for quantitative filling and sealing of various water-based and oil-based materials in various industries such as food, pharmaceuticals, daily chemicals, fine chemicals, grains, adhesives, coatings, inks, etc., as well as quantitative packaging and filling of various powdered and granular materials.

　　Quotation Instructions

　　The configuration of this product is different, and the price may fluctuate due to different parameters and configurations. Due to different parameters, the final requirements for the electronic scale are also different. The displayed price is not the final price of the product. We apologize for any inconvenience caused.

　　Please contact our customer service staff before making a purchase. We will confirm the product information, technical parameters, and quotation for you. We will provide you with discounted prices and sincere service. Looking forward to your call!

　　The above parameter information corresponds to the image.

　　-

　　Shanghai Kaishi Electronics Co., Ltd. is a wholly-owned subsidiary of South Korean CAS Corporation invested in China in 1994. Main business: Weighing liquid filling machine, automatic filling machine manufacturer CAS Kaishi IBC bucket ton filling machine, fully automatic weighing filling machine, semi-automatic filling machine, automatic capping machine, automatic capping machine, labeling machine, conveying equipment, winding machine, fully automatic packaging machine, automatic packaging palletizing production line, palletizing machine and other complete sets of filling and packaging equipment. Welcome new and old users to call and negotiate~

　　CAS Co., Ltd. is a large weighing equipment enterprise in South Korea, one of the world's comprehensive weighing equipment enterprises, and a vice director unit of the China Weighing Equipment Association. Its main products include industrial weighing solutions, retail weighing solutions, laboratory weighing solutions, and more. Committed to providing customers with solutions for the rational application of weighing technology in various industrial settings.

　　If you have any other questions, please contact Kaishi and we will provide you with more information.

AfterSalesService :

• IBC bucket filling machine