CAS Keshi Reactor Weighing Module Price Reactor Weighing Module Manufacturer

Description :

Shanghai Kaishi Electronics Co., Ltd. produces reactor weighing modules. Reactor weighing module prices are available. Reactor weighing module manufacturers_

　　The selection of weighing modules is generally based on the support points of the container, and the range of modules in sets of 3 or 4 is selected. Due to factors such as the weight of the weighing body (container), vibration impact, and unbalanced load, the following rules are generally followed for selection. Multi sensor static weighing system: fixed load (scale platform, container, etc.)+variable load (load to be weighed) ≤ selected sensor rated load x number of sensors equipped x 70%, where 70% of the coefficient is added considering vibration, impact, and unbalanced load factors. Attention should be paid to horizontal adjustment during the installation of weighing modules, including the installation plane of individual modules and the horizontal adjustment between a set of weighing modules. The sensor cannot pass current during welding. When welding the top plate, the ground wire should be connected to the scale body. When welding the bottom plate, the ground wire should be connected to the foundation to prevent damage to the sensor. If there is a material conveying pipeline on the scale body, it should be replaced with a hose or the connecting pipeline should be made as long as possible to prevent them from eating up the actual load of the sensor and causing errors. To weld a weight calibration table on the container for calibration purposes. There is usually no place to place weights on the container, and a platform needs to be welded to place the weights. Usually welded under the container for easy placement of weights up and down. The junction box must be moisture-proof, and any excess holes should be plugged with sealed plugs. If the junction box is installed outdoors, a protective box must be added to prevent rain. Malfunctions caused by moisture in the junction box during use often occur, so it must be given sufficient attention. Precautions for debugging weighing modules: Before debugging, it is necessary to check whether the top nut of the supporting screw of each weighing module has been loosened and whether the sleeve is in a free state. Otherwise, significant errors may occur, and even weighing may not be possible. Pay attention to horizontal adjustment, including the installation plane of individual modules and the horizontal adjustment between a set of weighing modules. The sensor cannot pass current during welding. When welding the top plate, the ground wire should be connected to the scale body. When welding the bottom plate, the ground wire should be connected to the foundation to prevent damage to the sensor. If there is a material conveying pipeline on the scale body, it should be replaced with a hose or the connecting pipeline should be made as long as possible to prevent them from eating up the actual load of the sensor and causing errors. To weld a weight calibration table on the container for calibration purposes. There is usually no place to place weights on the container, and a platform needs to be welded to place the weights. Usually welded under the container for easy placement of weights up and down.

　　The junction box must be moisture-proof, and any excess holes should be plugged with sealed plugs. If the junction box is installed outdoors, a protective box must be added to prevent rain. Malfunctions caused by moisture in the junction box during use often occur, so it must be given sufficient attention.

　　If more information is needed,

　　Please contact Kaishi.

AfterSalesService :

• CAS Keshi Reactor Weighing Module