Reservoir in arid areas with a static water pressure resistance value of 800 grams with two fabrics and one membrane, and a waterproof value of 900 grams with two fabrics and one membrane

Description :

　　Specification for Composite Geomembrane:

　　One cloth, one film base cloth: 100-1000g/㎡ Film thickness: 0.1-1.5mm

　　One cloth, two film base cloth: 100-1000g/㎡ Film thickness: 0.1-0.8mm

　　Two fabrics and one film base fabric: 80-600 g/㎡ Film thickness: 0.2-1.5 mm

　　Multi cloth and multi film base fabric: 100-1000g/㎡ Film thickness: 0.1-0.8mm

　　Performance characteristics of composite geomembrane:

　　Good flexibility, in addition to the anti-aging, high strength, good flexibility, and isolation properties of geotextiles, it also has a sealing (anti-seepage) function.

　　Application and Function of Composite Geomembrane:

　　Widely used in many fields such as water conservancy, dams, tunnels, road construction, airports, etc., it mainly plays a role in waterproofing, anti-seepage, protection, reinforcement, leakage prevention, isolation, etc. in engineering.

　　Precautions for Construction of Composite Geomembrane:

　　1. The use should be buried, and the covering thickness should not be less than 30cm

　　2. The entire anti-seepage system is composed of a cushion layer, anti-seepage layer, transition layer, and protective layer.

　　3. The soil should be solid, avoiding uneven settlement, cracks, and removing grass and tree roots within the anti-seepage range. Lay a protective layer of sand or clay with small particle size on the contact surface with the membrane.

　　4. When laying, do not pull the geomembrane too tightly. It is better to embed the soil at both ends in a corrugated shape, especially when anchoring with rigid materials, leaving a certain amount of expansion and contraction.

　　5. During construction, stones and heavy objects should be avoided from directly hitting the geomembrane. The construction should be carried out while laying the membrane and covering the protective layer. Reservoir in arid areas with a static water pressure resistance value of 800 grams with two fabrics and one membrane, and a waterproof value of 900 grams with two fabrics and one membrane

　　Precautions for construction of composite geomembrane:

　　1. Composite geomembrane is formed by heating one or both sides of a thin film with far-infrared radiation in an oven, and pressing the geotextile and geomembrane together through a guide roller. With the improvement of production technology, there is also a casting method for making composite geomembranes. Its forms include one cloth and one film, two cloths and one film, two films and one cloth, etc. Reservoir in arid areas with a static water pressure resistance value of 800 grams with two fabrics and one membrane, and a waterproof value of 900 grams with two fabrics and one membrane

　　2. Geotextile serves as a protective layer for geomembrane, preventing damage to the anti-seepage layer. In order to reduce the ultraviolet radiation and increase the anti-aging performance, the embedding method is adopted.

　　During construction, the first step is to use sand or clay with smaller diameters to level the base surface, and then lay the geomembrane. Do not tighten the geomembrane too tightly. The two ends should be buried in the soil in a corrugated shape, and then a transition layer of about 10cm should be laid on the geomembrane with fine sand or clay. Build 20-30cm stone blocks (or precast concrete blocks) as a protective layer against erosion. During construction, efforts should be made to avoid stones directly hitting the geomembrane, and protective layer construction should be carried out while laying the membrane. The water storage tank in arid areas has a static water pressure resistance value of 800 grams with two fabrics and one membrane, and a waterproof value of 900 grams with two fabrics and one membrane. The composite geomembrane should be connected to surrounding structures using expansion bolts and steel plate pressure strips for anchoring. The connection part should be coated with emulsified asphalt (2mm thick) for bonding to prevent leakage at that location.

AfterSalesService :

• 800 grams of two fabrics and one film