Liaoning produces road sealant for road filling in Fuxin City -30 degree road sealant

Description :

　　This product is widely used for crack injection and repair in concrete bridges, buildings, water conservancy, road surfaces and other engineering projects, as well as reinforcement injection and repair of defects such as honeycomb and looseness inside concrete. It is also used for anti-corrosion construction of fiberglass and structural surface coatings. Suitable for grouting and bonding the gaps generated in concrete and brick concrete components to achieve the purpose of crack repair and reinforcement.

　　Application of sealant:

　　The road sealing adhesive developed and produced by the company can be widely used for sealing and repairing cracks in asphalt pavements such as highways, high-grade highways, urban highways, airports, and sealing joints in cement concrete pavements!

　　The company conducts research and analysis on cracks in different road conditions. Based on comprehensive analysis and research, it selects modified asphalt, polymer, various stabilizers and other raw materials, and develops and produces hot-melt polymer sealant with a predetermined ratio!

　　Construction technology of pavement sealant

　　Important slotting, cleaning, and grouting. Of course, the three parts of innocence may appear simple, but attention should still be paid to the details.

　　Important:

　　Clean the seams. At the beginning, use a joint cleaning saw to remove sand and gravel from the joint, consolidate the mud, and apply a pressure greater than 0.5mpa to completely remove dust and other cleaning agents from the joint, ensuring that the joint wall and interior are clean. The joint wall inspection is based on the criterion that no dust can be wiped off.

　　Apply adhesive tape. Tape is being applied to both sides of the joint to prevent the overflow of sealant and purify the road surface.

　　The ingredients are prepared by dedicated staff according to their skills, and the ingredients are stopped and mixed evenly.

　　Grouting cannot be done in one go, it should be done 2-3 times.

　　Find replacements, there are replacement personnel to fill the parts that are not fully filled.

　　Clearing site. After the sealant is solidified, it is necessary to deal with the excess overflow and ensure that the road surface is clean.

　　The construction period shall be stopped and the construction speed adjusted according to the requirements of the negotiation between Party A and Party B.

　　The construction quality is strict, and the Ministry of Transport emphasizes construction standards.

AfterSalesService :

• Liaoning produces highway sealant