OPGW fiber optic pole downlead clamp model ADSS tower rubber clamp block downlead fixing fixture

Description :

　　Guide rod downlead clamp model ADSS tower rubber clamp block downlead fixture

　　Product Introduction

　　The down conductor clamp is used to fix the optical cable pulled down from the tower to the tower, preventing it from shaking and avoiding wear on the cable

　　Surface, mainly used for terminal towers and splice towers of optical cable lines, with its main technical parameters being cable diameter

　　（mm）， Generally, one set is provided every 1.5m.

　　1、 Function: Tighten the optical cable pulled down or up from the pole to prevent it from shaking, in order to avoid

　　Wear and tear of optical cables

　　2、 Usage conditions: At the beginning and end poles, splice poles, etc. of the optical cable line.

　　3、 Usage: Generally, install one every 1.5 meters.

　　4、 Special note: All fiber optic cable down conductors are required by the design to be led down from the tower legs, along the crossbar to the junction box.

　　Prevent the formation of golden hooks on the optical cable when it is pulled down.

　　Purpose: The lead down fixture is mainly used for the fixed installation of ADSS and OPGW optical cables when leading wires on towers. For example, at the fiber optic cable joint pole (tower), the fiber optic cable is fixed from the suspension fittings to the installation location of the splice box; The optical cable is led down from the tower to underground pipelines, cable trenches, direct burial, and fixed in places such as the computer room. To prevent damage to the optical cable caused by friction with towers or other objects under wind force, in order to protect the safety of the optical cable.

　　Product actual photos

　　Ordering Instructions

　　Ordering Notice: 1. Applicable to which type of optical cable

　　2. For pole or tower use (pole diameter required)

AfterSalesService :

• Rod down conductor clamp