Manufacturer of gas drainage spiral steel pipe, price of gas drainage spiral steel pipe

Description :

　　The spiral steel pipe coated with plastic for gas drainage is a steel plastic composite pipe made of welded steel pipe as the base material, using sandblasting chemical dual pretreatment, preheating, internal and external coating, curing, post-treatment and other processes. It has excellent comprehensive performance, strong corrosion resistance and mechanical properties, good chemical stability and water resistance, and has functions such as drag reduction, anti-corrosion, compression resistance, and antibacterial. It is generally not restricted by the conveying medium, and the coating layer has a strong bonding force with steel. Coating material: Epoxy resin (EP) is suitable for working environments below 80 ° C. The steel pipe coating has extremely high adhesion, high hardness, good impact resistance, and good chemical corrosion resistance. The application range of coated steel composite pipes in pipeline service life, as well as specific properties such as rigidity, impact resistance, corrosion resistance, and corrosion and scaling resistance, are significantly better than other processes such as lining plastic, lining rubber, hot-dip galvanizing, etc. The main processes for coating plastic pipes inside and outside pipelines are electrostatic spraying and hot-dip plastic coating. Generally, electrostatic spraying is suitable for pipe requirements in any field, while hot-dip plastic coating can be used in fields such as fire protection and cable conduit. Its process is basically as follows: first, ordinary steel pipes are subjected to a series of pretreatment processes including chamfering and deburring, end face leveling, sandblasting and rust removal, followed by preheating to a temperature of 220 degrees Celsius. Then, the preheated steel pipes are electrostatically sprayed or immersed in polyethylene powder. If the product is sprayed with epoxy resin, it needs to be sent to a curing furnace for curing. The curing temperature requirement is around 280 degrees Celsius. After four hours, the product can be removed and repaired, and the product processing is completed.

　　There are also many details that need to be paid attention to in the processing technology, such as uniform coating of the plastic layer, spraying on every part, control of immersion time, etc. In order to make the product good, it is necessary to choose epoxy or polyethylene powder, and then advanced process technology and equipment support are required. Epoxy resin coated composite steel pipe is a steel plastic composite product that uses steel pipe as the base pipe and plastic powder as the coating material. A layer of plastic is melted and coated on the inner surface, and a layer of plastic or other material anti-corrosion coating is melted and coated on the outer surface. Plastic coated steel pipes are divided into polyethylene coated steel pipes and epoxy resin coated steel pipes according to the different internal coating materials. The product marking consists of the code for the coated composite steel pipe, the code for the inner coating material, and the nominal size. Water supply lined plastic composite steel pipe is made by lining the inner wall of the steel pipe with thermoplastic materials such as polyethylene (PE), heat-resistant polyethylene (PE to RT), cross-linked polyethylene (PE-X), polypropylene (PP to R), rigid polyvinyl chloride (PVC to U), chlorinated polyvinyl chloride (PVC to C), etc. according to the requirements of the conveying medium. Due to technological improvements, some products have added an outer plastic layer. The product is divided into plastic lined steel pipes for cold water and plastic lined steel pipes for hot water according to the temperature of the transported water. The product label consists of the code for the lined plastic steel pipe, the code for the lined plastic material, and the nominal diameter. Consumers should try to choose reputable products from large shopping malls and stores according to their actual needs when purchasing such products.

　　Highly praised for its comprehensive testing methods and excellent product quality. Both reinforced spiral welded pipes and spiral welded pipes can be processed from carbon steel plates. After the welding flange is completed, the surface zinc layer of the steel pipe is hot-dip galvanized to 4-5 times the thickness of ordinary galvanized sheet zinc, greatly improving the service life of the steel pipe and comparable to stainless steel pipes of the same thickness. And the price is only one-third of that of stainless steel pipes, making it an ideal choice for coal mine gas extraction pipes. Currently, there are many gas extraction pipes directly processed from galvanized sheet in the market. When this type of steel pipe is welded, the zinc layer in the heat affected zone on both sides of the weld is damaged, greatly shortening the service life of the steel pipe. In other words, the welding process of galvanized sheet is not very mature internationally; The weld seam is not firm and is particularly prone to cracking, causing serious gas leakage, which in turn seriously affects the gas extraction effect and poses a great safety hazard to the enterprise. Stainless steel reinforced gas pipes are a new choice for coal mine gas pipelines, used to replace polyethylene gas pipes and steel coated gas pipes. They have many excellent properties. Spiral steel pipe manufacturers need to pay attention to the following issues during the production of spiral welded pipes: 1. Oil coating and marking: Oil coating should be carried out on qualified spiral steel pipes to prevent corrosion, and marking should be carried out according to customer requirements. 2. Leveling and milling edges: Use an anvil press to level the originally curled steel plate, and then use a milling machine to perform double-sided milling on the two edges of the steel plate to achieve the required plate width, plate edge parallelism, and groove shape. 3. Shear forming: Spiral bend the steel plate into a tube shape along the outer edge. 4. Butt welding cutting: Double sided submerged arc welding technology is used for pre welding, internal welding, and external welding. Cut the welded steel pipe into the specified length using a plasma ruler. 5. Visual inspection: Technicians inspect some basic parameters. 6. Ultrasonic testing: Conduct a 100% inspection of the internal and external welds, as well as the base metal on both sides of the weld. 7. X-ray inspection: Conduct a 100% X-ray industrial television inspection on the internal and external welds, using an image processing system to ensure the sensitivity of the inspection. 8. Pressure test: The spiral steel pipe is inspected one by one on a hydraulic testing machine to ensure that the steel pipe meets the standard test pressure requirements. 9. Inverted flat head: The spiral steel pipe that has passed inspection is processed at the pipe end to achieve the required pipe end groove size. 10. Inspection: Spiral steel pipes are subjected to ultrasonic and X-ray testing again, as well as magnetic particle inspection at the pipe ends, to check for welding problems and pipe end defects. Spiral steel pipes used for gas drainage are important safety measures in coal mines. The requirements for gas pipes in industrial production are very strict. The performance of mining gas pipes requires the integration of the advantages of steel pipes and plastic pipes.

　　Epoxy coated composite steel pipes for fire protection are often used in engineering construction as pipeline materials for water supply, drainage, fire protection, HVAC, anti-corrosion, shipbuilding, power and other fields, because they have better anti-corrosion and sanitary properties compared to ordinary steel pipes. However, the selection of coated steel pipes leaves many people confused, and consumers often report that they cannot find satisfactory steel pipes. Today, I will share with you some purchasing experiences and take a look at the key points for purchasing epoxy coated composite steel pipes for fire protection. Due to the easy rusting of ordinary steel pipes, which can have a certain impact on environmental hygiene and may also breed bacteria after long-term use, steel pipes cannot be used in the drinking water field. However, for fire protection, epoxy composite steel pipes with internal and external coatings are fixed to the inner and outer surfaces of the steel pipes using special plastic coating processes certified by national standards, isolating the steel pipes from the air and avoiding oxidation, rusting, and corrosion. This not only maintains the mechanical properties of the steel pipes but also improves their corrosion resistance and overall quality. Solved the problems of drinking water hygiene and fire scaling, thus widely applied in various fields. At present, manufacturers of epoxy coated composite steel pipes for fire protection must be certified by the national fire inspection department. Unqualified products pose a threat to the safety of fire protection work. Therefore, when purchasing epoxy coated composite steel pipes for fire protection, it is necessary to choose products that have been recognized by the fire inspection department to ensure the safety and reliability of product quality. When choosing inner and outer coated steel pipes, some cases can be referred to. In some larger engineering projects, inner and outer coated steel pipes are often used. Usually, in order to ensure the quality of the project, the project leader decides which pipe to choose after careful consideration when selecting materials. Therefore, the fire protection inner and outer coated epoxy composite steel pipes used in the reference cases are more reliable, and the pipeline quality is guaranteed. If the internal and external coated epoxy composite steel pipes for fire protection are purchased directly from the manufacturer, it is possible to conduct on-site inspections of the factory, visit the production process and product quality, and directly visit the factory. This not only allows for a better understanding of product quality, but also the manufacturer's production capacity, ensuring the reliability of the manufacturer. Overview of fire protection coated steel pipes: By coating and anti-corrosion of steel pipes or galvanized pipes, the problems of corrosion and scaling that occur during the burial and water transportation of ordinary steel pipes have been solved. The phenomenon of pipeline blockage and spray blockage has been eliminated, and the service life of the pipeline has been improved. The service life of the coated steel pipe is over 50 years.

　　3PE anti-corrosion steel pipe production and quotation 3PE anti-corrosion steel pipe production and processing quotation; Many people only know one thing about the use of 3PE anti-corrosion steel pipes, but they don't know the other. Its function is really broad, and it is suitable for underground water supply and drainage, underground spraying, positive and negative pressure ventilation, fire sprinkler and other pipe networks in coal mines. Thermal power plant process water waste residue and return water transportation pipeline. The Vicat softening point is set to be no less than 110; The thickness of the external anti-corrosion layer is determined according to the German standard DIN30670, which mainly uses low and medium density polyethylene. The impact resistance strength of the 3PE anti-corrosion layer has been greatly improved, ensuring the construction quality of the Shaanxi Beijing pipeline and the Kushan pipeline. SY/T0413 has also significantly improved the peeling strength and impact resistance indicators of the 3PE anti-corrosion layer, and clearly stipulated the mechanical strength and weather resistance of the 3PE anti-corrosion layer based on the content of some special materials such as carbon black. It has also increased the sampling frequency of the joint coating peeling strength (i.e. the peeling strength of the heat shrink sleeve and heat shrink tape to the primer steel), making a contribution to ensuring the quality of the external anti-corrosion coating of the pipeline. The heat aging resistance of polyethylene in SY/T0413 requires a 100 day or 200 day test. When it is necessary to sample and inspect the performance of polyethylene during the production process, the experimental period is too long and there is no operability to speak of. It is worth studying whether the thermal oxidation induction period value can be used instead. The upper and lower limits of the thickness of the polyethylene 3PE adhesive layer. 3PE anti-corrosion steel pipe is suitable for underground water supply and drainage, underground spraying, positive and negative pressure ventilation, pumping, fire sprinkler and other pipe networks in coal mines. Dehui 3PE anti-corrosion steel pipe price for process water waste and return water transportation pipelines in thermal power plants. The applicability of water supply pipelines for anti spray and sprinkler systems. Cable protection sleeves for power, communication, highways, etc. Suitable for high-rise building water supply, heating network, water supply engineering, gas transmission, buried water transmission and other pipelines. Process pipelines for transporting corrosive media in industries such as petroleum transportation pipelines, chemical engineering, and printing and dyeing. Dehui 3PE anti-corrosion steel pipe prices for sewage treatment discharge pipes, sewage pipes, and biological pool anti-corrosion projects. For agricultural irrigation pipes, deep well pipes, drainage pipes and other network applications, it can be said that 3PE anti-corrosion steel pipes are essential in current construction, and we believe that with the extension of technology, they will have even more brilliant achievements in the future. Jiang Zhubiao introduced that in 2014, the sales profit margin of large and medium-sized coated spiral steel pipe factories in China was only 0.04, while the average sales profit margin of the non steel industry was 3.56. Although it did not reach the average profit level of the national industrial industry, it still made a huge contribution to coated spiral steel pipe factories. There is controversy in society over whether plastic coated spiral steel pipe factories should make great efforts to develop non steel industries. However, it can be affirmed that without engaging in non steel industries, the future of steel enterprises will definitely be difficult, "Jiang Zhubiao pointed out. After years of development, many enterprises have formed new growth points in multiple fields such as metallurgical equipment manufacturing, deep processing of plastic coated spiral steel pipe products, mineral product development, engineering design, real estate, logistics, new materials, and comprehensive utilization of resources. However, overall, except for the relatively large proportion of non steel industries in plastic coated spiral steel pipe factories such as Guangzhou Iron and Steel, Kunming Iron and Steel, and Hangzhou Iron and Steel, the development level of non steel industries in the vast majority of enterprises is still relatively low. 3PE anti-corrosion and insulation steel pipes have good insulation performance, with heat loss only 25% of traditional pipes. Long term operation can still save significant resources.

　　3PE anti-corrosion steel pipe refers to a three-layer polyolefin coating (MAPEC) external anti-corrosion steel pipe, which is a commonly used type of anti-corrosion pipeline in China. Generally refers to the anti-corrosion of the outer wall of steel pipes. Other anti-corrosion methods include IPN8710, FBE epoxy powder, and epoxy coal tar.

　　Construction steps for 3pe anti-corrosion steel pipes for buried water supply: FBE anti-corrosion steel pipes, cement mortar anti-corrosion steel pipes, polyurethane foam direct buried steel pipes, steel sleeve steel steam insulation steel pipes, and fiberglass resin anti-corrosion; The company also manufactures various epoxy series anti-corrosion coatings, IPN8710 non-toxic drinking water anti-corrosion coatings, organic high-temperature resistant anti-corrosion coatings, acid series anti-corrosion coatings, etc. The coating film has excellent comprehensive properties such as oil resistance, acid resistance, salt, benzene and other chemical media resistance, as well as wear resistance, moisture resistance, etc. The processing methods of 3PE anti-corrosion steel pipes for underground water supply are generally divided into two types: winding and circular mold wrapping. The three-layer structure polyethylene anti-corrosion coating (3PE) combines the excellent properties of fusion bonded epoxy powder coating and extruded polyethylene anti-corrosion coating. It combines the interface characteristics and chemical resistance of fusion bonded epoxy powder coating with the mechanical protection characteristics of extruded polyethylene anti-corrosion coating, significantly improving its application in pipeline anti-corrosion for domestic West East Gas Pipeline and oilfield oil transportation, urban gas supply and water supply. Each with their own performance. Therefore, as an external protective layer for buried pipelines, it is very superior. According to relevant information, three-layer PE can extend the lifespan of buried pipelines to 50 years, and is currently considered an advanced external anti-corrosion technology for pipelines. In China, three-layer PE has been first applied in the oil and gas system. 3PE anti-corrosion steel pipe and polyethylene anti-corrosion pipe have three layers in China. Therefore, the 3PE anti-corrosion layer is an ideal external protective layer for buried pipelines. According to authoritative testing, buried pipelines using 3PE anti-corrosion technology can have a lifespan of up to 50 years. The 3PE anti-corrosion steel pipe coating, also known as the three-layer polyethylene anti-corrosion coating, cleverly combines the European 2PE anti-corrosion layer with the widely used epoxy powder anti-corrosion steel pipe coating (FBE) in North America.

AfterSalesService :

• Spiral steel pipe manufacturer