Coated composite steel pipe with epoxy coating inside and outside, fire protection coating pipe

Description :

　　Currently, not only are common products such as range hoods, stoves, disinfection cabinets, and microwave ovens selling well, but dishwashers and ovens are also popular. The conveying resistance is small, and under the same conditions, the conveying capacity can be increased by 30%. Convenient connection possibility completely overcomes the disadvantage of difficult connection of pure plastic mining materials. Flanges, quick couplings, etc. can be used as needed to connect with the original steel pipes and valves underground, with strong interchangeability. Self lubrication: Smooth inner wall without scaling. The price of inner and outer coated composite steel pipes is mainly based on epoxy resin and coal tar pitch as the main film-forming materials, added with various anti rust pigments, insulating fillers, toughening agents, leveling agents, diluents, anti settling agents, etc. The B component is a modified amine curing agent or a curing agent as the main material, added with pigments and fillers.

　　Introduction to epoxy coal tar anti-corrosion steel pipe products:

　　The impact of the roughness of the inner wall surface of the pipe, which is divided into epoxy coal tar primer and topcoat, is greater than that of local raised areas (such as spiral welds or longitudinal welds). By reducing the corrosion current and applying a DC power supply, the steel pipe creates a negative potential on the soil, forming cathodic protection, which can fundamentally stop the cathodic process due to the potential difference between the anode and cathode. Only by changing our thinking and starting early can we seize the opportunity and lead the overall situation. It is packaged in two components, with component A as resin, initiator, and component B as active monomer and catalyst. Fourthly, the coating on the inner wall of the coated steel pipe has strong adhesion, excellent impact resistance, and strong cathodic stripping resistance..

　　So, some plastics cannot bond to the steel pipe wall. This product belongs to the category of "chemical reactive" coatings and cannot be used for steel pipe coating. The circuit resistance can be increased by applying anti-corrosion coating evenly on the outer wall of the pipeline, without any omissions. The water quality standards for water supply are gradually improving, but the aging and corrosion of urban water supply pipelines pose a severe challenge to water supply safety. The increasingly serious sedimentation and corrosion in old pipelines not only reduce water supply capacity, but also lead to deterioration of water quality in pipelines, affecting regional image. With the continuous improvement of people's living standards

AfterSalesService :

• Coated composite steel pipe