JSZD-1300 Inflatable Film Bag Making Machine

Description :

　　Functional Description

　　The JSZD-1300 inflatable film special bag making machine is designed as a new type of inflatable packaging used in the 21st century; The new generation specialized bag making machine adopts advanced PLC control system and efficient host communication digital servo system, and achieves real-time parameter display through FTF human-machine interface.

　　Feeding: 1.5kw × 2=3kw

　　Host: 4kw × 1=4kw

　　Material discharge: 0.55kw × 3=1.65kw

　　Vertical sealing: 3kw × 8=24kw

　　Horizontal sealing: 3kw × 6=18kw

　　Control system, etc.: 2kw

　　Total: 52.65kw

　　Cooling water: 15L/min

　　Gas source: 0.6Mpa

　　Weight: Approximately 6000kg

　　Dimensions (L × W × H): 9910 × 2000 × 2380mm

　　Technical Specifications

　　Material: Suitable for various heat sealed composite films

　　Roll size:

　　Width: 1250mm;

　　Diameter: 600mm (upper, middle, and lower layers)

　　Bag making cycle: 100parts/min (mechanical design speed)

　　Note: The actual bag making speed may decrease due to factors such as bag type and material

　　Bag width: 1200mm

　　Bag making length: 50-300mm (length of one pull)

　　Bag making parameters: Real time display by TFT, can preset bag making quantity, bag making speed, punching time, batch number, etc.

　　Information prompt: photoelectric loss, temperature deviation, intermediate tension, etc.

　　Unwinding: Horizontal feeding shaft, capable of feeding three pieces at the same time: upper, middle, and lower.

　　Roll up: horizontal feed shaft, capable of carrying out upper and lower layer feeding, roll up diameter: 600mm

AfterSalesService :

• bag making machine